熄灭
发表于 2025-3-23 13:27:19
Analysis of Physical Cutting Mechanisms and Their Effects on the Tool Wear and Chip Formation Proce-55531. The objective is to understand the effect of all cutting parameters on the tool wear behavior and stability of the cutting process. The investigations have been focused on the mechanisms of chip formation and their interaction with tool wear. At the microstructure scale, the analysis confirm
协奏曲
发表于 2025-3-23 13:50:54
Green Machining of Ti-6Al-4V Under Minimum Quantity Lubrication (MQL) Condition,ns of MQL parameters. Different parameters of MQL system have different influences on the milling force and milling temperature, which are closely connected to the lubrication and the coolant. The cutting force and temperature play significant roles in the improving/reducing cutting quality of workp
口诀
发表于 2025-3-23 21:05:31
Ultrasonically Assisted Machining of Titanium Alloys,monstrate tractable benefits in the machining of titanium alloys. We also demonstrate how further improvements may be achieved by combining this machining technique with the well known advantages of hot machining in metals and alloys.
富饶
发表于 2025-3-24 01:20:54
https://doi.org/10.1007/978-3-662-43902-9Chip Formation; Machinability of Alloys; Surface Integrity; Titanium Materials
maculated
发表于 2025-3-24 05:24:54
http://reply.papertrans.cn/63/6209/620835/620835_15.png
可用
发表于 2025-3-24 08:14:39
http://reply.papertrans.cn/63/6209/620835/620835_16.png
backdrop
发表于 2025-3-24 11:17:48
Ultrasonically Assisted Machining of Titanium Alloys,monstrate tractable benefits in the machining of titanium alloys. We also demonstrate how further improvements may be achieved by combining this machining technique with the well known advantages of hot machining in metals and alloys.
palette
发表于 2025-3-24 15:21:18
http://reply.papertrans.cn/63/6209/620835/620835_18.png
宽容
发表于 2025-3-24 19:08:52
http://reply.papertrans.cn/63/6209/620835/620835_19.png
修饰
发表于 2025-3-25 00:48:13
Book 2014ent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloy