Agility
发表于 2025-3-23 10:27:24
http://reply.papertrans.cn/63/6209/620828/620828_11.png
偏离
发表于 2025-3-23 17:51:15
http://reply.papertrans.cn/63/6209/620828/620828_12.png
Inordinate
发表于 2025-3-23 19:15:06
Thrust Force Analyses in Drilling FRP Composites,minimal surface and sub-surface damage. A number of complications arise in this process, such as multiphase laminated materials (hard reinforced fibers within soft polymer matrix) and complex cutting edges of the drill bit. According to existing research, changes in the drilling parameters’ setting
放弃
发表于 2025-3-24 01:28:58
http://reply.papertrans.cn/63/6209/620828/620828_14.png
翅膀拍动
发表于 2025-3-24 06:22:20
http://reply.papertrans.cn/63/6209/620828/620828_15.png
condemn
发表于 2025-3-24 09:19:37
Comprehensive Study on Tool Wear During Machining of Fiber-Reinforced Polymeric Composites,) industries. The machining of composite materials is an important manufacturing process. It has attracted several studies over the last decades. Tool wear is a key factor that contributes to the cost of the machining process annually. It occurs due to sudden geometrical damage, frictional force and
不怕任性
发表于 2025-3-24 13:13:12
http://reply.papertrans.cn/63/6209/620828/620828_17.png
鸟笼
发表于 2025-3-24 18:32:14
http://reply.papertrans.cn/63/6209/620828/620828_18.png
AV-node
发表于 2025-3-24 21:02:18
,Influence of Different Tool Materials on the Machining Performance in µED-Milling of CFRP Compositetating tool. Micro-channels of a length-to-depth ratio of 7.5 (depth: 400 µm and length: 3000 µm) were fabricated in CFRP using copper and brass tools of 960 µm in diameter. An assisting-electrode in the form of a copper sheet of thickness of 70 µm was used to initiate the sparking between the inter
conception
发表于 2025-3-24 23:30:37
,Controlled Depth Milling of Hybrid Aerospace Grade Materials Using Abrasive Water Jet – Critical Reerations as much as possible in case of damage. In this context, the damaged area is removed by conventional or non-conventional milling processes, depending on the material constitutive of the structure to repair. However, all these techniques present issues in case of aerospace grade materials (e.