Reservation
发表于 2025-3-27 00:19:45
http://reply.papertrans.cn/59/5889/588879/588879_31.png
condescend
发表于 2025-3-27 05:04:23
http://reply.papertrans.cn/59/5889/588879/588879_32.png
气候
发表于 2025-3-27 06:52:51
Design: Some Comments on the Design of Low-Loss Storage Vessels, Containers and Tanks,ing specimens. However, the porosity of plastics and stainless steels provide problems for constructing high vacuum insulation. Finally, this chapter considers the thermal design of 12 different cryogenic applications ranging in size, from a LIN cooled sample of 10 mm diameter, to an LNG storage tank of 75 m diameter.
从容
发表于 2025-3-27 11:49:14
http://reply.papertrans.cn/59/5889/588879/588879_34.png
muffler
发表于 2025-3-27 17:16:08
Heat Flows into a Cryogenic Storage System: Overall Picture, the enthalpy of the vapour between NBP and ambient temperatures. Once identified, each heat source can be reduced by the design of several techniques; also introducing crossovers of A to B flows, so that the net A flow is reduced to a minimum liquid boil off rate.
PATHY
发表于 2025-3-27 21:24:55
Evaporation of Cryogenic Liquids,liquid boil-off is determined by the surface evaporation. There is no heterogeneous nucleate boiling under storage conditions. However, it has been found that instabilities can arise causing peaks in evaporation, when the surface layers are disturbed.
同谋
发表于 2025-3-28 01:06:55
,Insulation: The Reduction of ‘A’ and ‘B’ Heat In-Flows,lumn. This chapter describes in detail how these insulation properties may be used advantageously to reduce both A and B heat inflows, by radiation, conduction and convection, in the design of all cryogenic systems.
forbid
发表于 2025-3-28 03:00:27
http://reply.papertrans.cn/59/5889/588879/588879_38.png
允许
发表于 2025-3-28 06:23:57
http://reply.papertrans.cn/59/5889/588879/588879_39.png
Foreshadow
发表于 2025-3-28 13:40:53
http://reply.papertrans.cn/59/5889/588879/588879_40.png