相一致
发表于 2025-3-30 10:47:39
http://reply.papertrans.cn/59/5889/588825/588825_51.png
Supplement
发表于 2025-3-30 14:06:32
http://reply.papertrans.cn/59/5889/588825/588825_52.png
服从
发表于 2025-3-30 17:58:03
http://reply.papertrans.cn/59/5889/588825/588825_53.png
dura-mater
发表于 2025-3-30 21:03:16
Optimum Refrigerant Selection for Low Temperature Engineering,rable properties and has no undesirable properties does not exist. However, algorithms for searching of a “tailored” refrigerant with desirable combination of properties are able to formulate mathematically on the basis of the multi-criteria decision making approach. It is evident that the task of a
壮观的游行
发表于 2025-3-31 01:42:51
Transitional Processes and Crisis Phenomena in Boiling of Cryogenic Liquids,nds strongly on the presence of ready evaporation centers on the heat releasing surface. From consideration of thermal balance and phase transition conditions, expressions for calculation, which are in satisfactory agreement with experimental data, for minimal transient critical heat flux for differ
canonical
发表于 2025-3-31 06:46:29
http://reply.papertrans.cn/59/5889/588825/588825_56.png
结合
发表于 2025-3-31 09:50:00
http://reply.papertrans.cn/59/5889/588825/588825_57.png
Mercantile
发表于 2025-3-31 13:41:38
1568-2609 ooling of low-temperature electronics. This volume contains chapters on basic refrigeration systems, non-compression refrigeration and cooling, and topics related to global environmental issues, alternative refrigerants, optimum refrigerant selection, cost-quality optimization of refrigerants, advan
Volatile-Oils
发表于 2025-3-31 20:05:45
Introduction to the Institute,electronics. All presently-available superconducting materials must be cooled to cryogenic temperatures for their operation. In recent years, environmental aspects have been an important issue in designing and development of low-temperature refrigeration systems.
famine
发表于 2025-3-31 22:00:23
The Effect of Inlet Subcooling on Two-Phase Flow Dynamic Instabilities In-Tube Boiling Systems,ase flow are obtained for various parameters and the results are presented in tabular form. The numerical solutions are determined using an explicit finite difference scheme. A satisfactory agreement between the theory and experiments is obtained