大吃大喝
发表于 2025-3-23 12:00:41
Low-Cost La(III)-Bentonite@Chitosan and La(III)-Bentonite@Polysulfone Composite Beads for the Remova(III)-bentonite@chitosan and La(III)-bentonite@polysulfone composite beads via phase inversion method has been delineated for the first time. The porosity and pore structures of polysulfone (PSf) beads were controlled through additives like La-Bnt. In this work, we have prepared the mentioned compo
SEMI
发表于 2025-3-23 15:42:28
http://reply.papertrans.cn/59/5888/588758/588758_12.png
大雨
发表于 2025-3-23 21:30:57
http://reply.papertrans.cn/59/5888/588758/588758_13.png
夸张
发表于 2025-3-23 23:12:54
Development and Characterisation of Bi-porous Metallic Wick for Loop Heat Pipes,pore radius and presents the results. Bi-porous copper wicks with distinguished sizes and pore characteristics are successfully developed for loop heat pipes. The powder compaction is performed at 12 KN force, followed by sintering at three different temperatures and durations. Among these, the best
陈列
发表于 2025-3-24 04:23:38
http://reply.papertrans.cn/59/5888/588758/588758_15.png
ITCH
发表于 2025-3-24 07:08:29
http://reply.papertrans.cn/59/5888/588758/588758_16.png
Concrete
发表于 2025-3-24 12:17:26
http://reply.papertrans.cn/59/5888/588758/588758_17.png
加剧
发表于 2025-3-24 16:41:07
http://reply.papertrans.cn/59/5888/588758/588758_18.png
没有准备
发表于 2025-3-24 21:33:19
Estimation of Wire Surface Quality Index During Wire Electric Discharge Machining Using Image Proceduring WEDM, a surface quality index (SQI) of eroded wires is determined in order to quantify and minimize the severity of wire surface damages. Zinc-coated brass wire was used for WEDM experiments on Ti–6Al–4V alloy. Field emission scanning electron microscope (FESEM) and energy-dispersive X-ray sp
admission
发表于 2025-3-25 00:00:06
Mechanical Properties of 3D Printed Modified Auxetic Structure: Experimental and Finite Element Stuoudhry et al. in Comp Part B: Eng 228:109437 [.]) to achieve enhanced energy absorption properties. In-plane quasi-static compression tests were conducted on 3D printed specimens followed by finite element (FE)-based numerical modeling. Results from FE and experimental analysis were used to investig