好忠告人
发表于 2025-4-1 04:39:39
http://reply.papertrans.cn/59/5870/586949/586949_61.png
牢骚
发表于 2025-4-1 06:07:18
Selected Mechanical Properties of Uniaxial Side Chain Liquid Crystalline Elastomers,eir un-stretched state are uniaxial rubbers with an internal variable, which are characterized by a small shear anisotropy in the hydrodynamic regime and a Rouse-like frequency behavior in the viscoelastic regime, (b) the elasticity of the network is Gaussian for the elastomers prepared by photo pol
过滤
发表于 2025-4-1 11:16:00
Recent Advances in the Rheology of Thermotropic Liquid Crystal Polymers,regions as very limited data exists for TLCPs. Filled TLCPs (aspect ratio of filler greater than 100) exhibit negative first normal stress difference (N.) in the low shear rate region. Moreover, in the high shear rate region the viscosity of filled TLCPs show more shear thinning behaviour compared t
Communicate
发表于 2025-4-1 17:53:47
http://reply.papertrans.cn/59/5870/586949/586949_64.png
注视
发表于 2025-4-1 19:40:13
http://reply.papertrans.cn/59/5870/586949/586949_65.png
tariff
发表于 2025-4-2 00:16:12
Liquid Crystal Diffraction Gratings Using Photocrosslinkable Liquid Crystalline Polymer Films as Alfabricate LC diffraction gratings that have high diffraction efficiencies, various polarization conversions, and can be switched with the application of external fields. We will then summarize our recent studies on photoalignment techniques of PLCP films and LC diffraction gratings with photoregulat
thrombus
发表于 2025-4-2 03:09:54
Liquid Crystalline Polymer Blends as Fillers for Self-Reinforcing Polymer Composites,he processing parameters such as mixing speeds, injection speeds, and melt temperatures. The correlation between structure development during injection molding, and the modulus of injection molded PET/LCP blends were also investigated. Process parameters such as injection speed and melt temperature
使纠缠
发表于 2025-4-2 07:21:22
http://reply.papertrans.cn/59/5870/586949/586949_68.png