Oratory
发表于 2025-3-25 06:40:26
http://reply.papertrans.cn/59/5829/582848/582848_21.png
circumvent
发表于 2025-3-25 09:21:30
http://reply.papertrans.cn/59/5829/582848/582848_22.png
sorbitol
发表于 2025-3-25 14:48:42
http://reply.papertrans.cn/59/5829/582848/582848_23.png
指令
发表于 2025-3-25 18:18:44
Tarja Tikkanenssimilation is very effective in updating the entire model to improve flood hydrograph at Hanwella by using MIKE 11 and real data of flood events. Before doing model simulations, calibration was done by using data of May of 2016. Then to demonstrate the Data Assimilation system, multiple 1D simulati
一小块
发表于 2025-3-25 22:57:59
http://reply.papertrans.cn/59/5829/582848/582848_25.png
compassion
发表于 2025-3-26 01:19:45
Małgorzata Malec-Rawińskissimilation is very effective in updating the entire model to improve flood hydrograph at Hanwella by using MIKE 11 and real data of flood events. Before doing model simulations, calibration was done by using data of May of 2016. Then to demonstrate the Data Assimilation system, multiple 1D simulati
MAL
发表于 2025-3-26 04:46:49
icients of variation (%) are quantified to assess the distribution of DCF in the fresh concrete and the results revealed that the dispersion of DCF in concrete decreases with an increase in length and dosage. Hardened concrete fracture surfaces were evaluated to assess fibre dispersion and orientati
大笑
发表于 2025-3-26 12:22:19
http://reply.papertrans.cn/59/5829/582848/582848_28.png
BET
发表于 2025-3-26 16:10:50
Barry J. Haken and thermolytic properties. Facemasks were initially shredded and melt-extruded to obtain filaments, which were subsequently pelletised. The pellets were hot-pressed using the compression moulding technique to make sheet-like panels. Tensile testing of the recycled sheet-like material exhibited fa
灵敏
发表于 2025-3-26 19:50:10
Sonja Kump,Sabina Jelenc Krašovece the maximum tensile strength was observed at the oil concentration of 10 wt % for both CO and VO. However, films containing VO have higher tensile strength (4.18 MPa) than the films containing CO (3.56 MPa). Tensile strain at break decreased when increasing the oil concentration up to 10 wt % for