FACT
发表于 2025-3-25 03:58:36
George ChryssolourisWorkshop on Performance Portable Programming Models for Accelerators, P^3MA 2018. .The 53 full papers included in this volume were carefully reviewed and select978-3-030-02464-2978-3-030-02465-9Series ISSN 0302-9743 Series E-ISSN 1611-3349
公司
发表于 2025-3-25 07:55:47
http://reply.papertrans.cn/59/5816/581526/581526_22.png
Optometrist
发表于 2025-3-25 13:34:39
http://reply.papertrans.cn/59/5816/581526/581526_23.png
退潮
发表于 2025-3-25 19:53:13
http://reply.papertrans.cn/59/5816/581526/581526_24.png
inclusive
发表于 2025-3-25 22:08:56
http://reply.papertrans.cn/59/5816/581526/581526_25.png
玉米
发表于 2025-3-26 04:06:54
http://reply.papertrans.cn/59/5816/581526/581526_26.png
名次后缀
发表于 2025-3-26 05:13:48
http://reply.papertrans.cn/59/5816/581526/581526_27.png
松驰
发表于 2025-3-26 12:04:48
Mechanical Engineering Serieshttp://image.papertrans.cn/l/image/581526.jpg
MUT
发表于 2025-3-26 15:34:50
http://reply.papertrans.cn/59/5816/581526/581526_29.png
横截,横断
发表于 2025-3-26 17:51:42
Lasers for Machining,be classified by the type of lasing medium used: solid, liquid or gas. The beam each type of laser produces has a characteristic wavelength and power range. The most common types of lasers used for machining are CO., Nd:YAG, and excimer lasers. Possible configurations for these three laser types are detailed.