是贪求
发表于 2025-3-23 10:08:23
http://reply.papertrans.cn/59/5813/581220/581220_11.png
Repatriate
发表于 2025-3-23 16:57:48
SystemC Coding Guideline for Faster Out-of-Order Parallel Discrete Event Simulation,ments, so that the level of parallelism in the design increases and higher simulation speed becomes possible. Our experimental results show that a maximum speedup of over 6.0x is achieved on an 8-core processor, which is 1.7 times faster than parallel simulation without the coding guideline.
Ankylo-
发表于 2025-3-23 21:05:46
http://reply.papertrans.cn/59/5813/581220/581220_13.png
巡回
发表于 2025-3-23 22:53:53
Book 2020main and mixed signal systems that include significant analog parts in electrical and non-electrical domains;.Includes formal and semi-formal system level design methods for complex embeddedsystems based on the Unified Modelling Language (UML) and Model Driven Engineering (MDE)..
内疚
发表于 2025-3-24 05:05:40
http://reply.papertrans.cn/59/5813/581220/581220_15.png
Encapsulate
发表于 2025-3-24 10:03:35
Alexander Schulz-Rosengarten,Reinhard von Hanxleden,Frédéric Mallet,Robert de Simone,Julien Deantoniemperature that occur across the boundary layer. In heat transfer, there are two boundary layers that develop simultaneously; a momentum boundary layer and a thermal boundary layer. The retarding effects of viscosity occur within the momentum boundary layer. In fluid mechanics, the forces exerted by
Antagonist
发表于 2025-3-24 14:33:03
http://reply.papertrans.cn/59/5813/581220/581220_17.png
dry-eye
发表于 2025-3-24 18:14:42
http://reply.papertrans.cn/59/5813/581220/581220_18.png
抑制
发表于 2025-3-24 21:54:09
Robert Wille,Bing Li,Rolf Drechsler,Ulf Schlichtmannhrough flow visualization different flow patterns and different flow regimes have been identified. The change of flow regime from one to another has been one of the potential causes affecting pressure drop and heat transfer characteristics in two phase flow. Pressure and thermal oscillations are the
脱离
发表于 2025-3-25 02:35:01
Yue Lu,Shengyu Duan,Tom J. Kazmierskids in the thermodynamically critical state. Emphasis is placed on those flow phenomena that occur at low temperatures. Flow analyses are, of course, a prerequisite to forced-convection heat transfer analyses, and thus these chapters add continuity to the text. The book is primarily written for the design engi978-1-4899-2000-3978-1-4899-1998-4