MAUVE
发表于 2025-3-26 21:16:48
http://reply.papertrans.cn/48/4763/476241/476241_31.png
宠爱
发表于 2025-3-27 02:53:43
Switching-Time and Heat Produced at Drivetrains with Centrifugal Clutches,odelica. Diverse system configurations are analyzed by means of the new modeling option. Simulations are executed in order to evaluate the model including the new objects and to determine the system behaviour at different parameters. The start-up time of the system and the heat production of the clutch are in focus especially.
包庇
发表于 2025-3-27 06:42:39
http://reply.papertrans.cn/48/4763/476241/476241_33.png
冷漠
发表于 2025-3-27 10:02:14
http://reply.papertrans.cn/48/4763/476241/476241_34.png
Cursory
发表于 2025-3-27 16:40:34
Conference proceedings 2024ation in mechanics and mechatronics; smart mechatronic production and control systems; optics systems; big data collecting, processing and analyzing; micro- and nanotechnology; automation; manufacturing optimization; and others...Since the book’s chapters provide contributions of researchers and pro
Brain-Imaging
发表于 2025-3-27 21:42:39
Improving the Drive of a Multi-operational Machine with a Multi V-Ribbed Belt,for quantitative changes in belt performance have been identified. The identity of the main structural elements of the modified and standard design is noted. Analytical material on the modification of multi V-ribbed belts is presented. An alternative option, in which an increase in the length of the
Audiometry
发表于 2025-3-27 22:45:06
Characterisation of the Cooling System Performance of Additively Manufactured Thermoforming Moulds,refore, adequate experiments, based on statistical DOE- Taguchi L16 (4.) plan, have been conducted to optimize and increase the performance of the cooling systems and to enlarge the knowledge in this underdeveloped field. The results showed that a 50% reduction of the mould temperature can be achiev
连系
发表于 2025-3-28 04:41:40
http://reply.papertrans.cn/48/4763/476241/476241_38.png
Common-Migraine
发表于 2025-3-28 08:16:14
Features of Modification of the Roughness and Hardness of the Surface of AISI 321 Stainless Steel wardness of AISI 321 stainless steel depending on the laser pulse parameters and processing strategy. Pulses of nanosecond duration were used. Linear processing was considered as a processing strategy. Surface roughness was studied along and across laser scanning lines. It has been established that n
贝雷帽
发表于 2025-3-28 13:41:47
Analysis of the Efficiency of Agricultural Tires for Low-Power Electric Tractors, model. The paper also presents a simulation model of the movement of an electric tractor, which is implemented in Matlab and allows to implement test cycles. The result of the research is a justified choice of agricultural tires for a low-power tractor with a 4x2 wheel formula based on the criterio