Congeal
发表于 2025-3-25 03:39:05
ch typische Merkmale und wesentliche Grundelemente identifizieren, die in jedem dieser Modelle auftreten. So muß in jedem Modell die Beziehung zwischen Systemzustand und Simulationszeit hergestellt werden (2.1). Diesbezüglich haben sich in der zeitdiskreten Simulation unterschiedliche konzeptuelle S
CAMP
发表于 2025-3-25 09:08:50
Tetsuaki Kawase,Yoko Hori,Takenori Ogawa,Shuichi Sakamoto,Yôiti Suzuki,Yukio Katorich typische Merkmale und wesentliche Grundelemente identifizieren, die in jedem dieser Modelle auftreten. So muß in jedem Modell die Beziehung zwischen Systemzustand und Simulationszeit hergestellt werden (2.1). Diesbezüglich haben sich in der zeitdiskreten Simulation unterschiedliche konzeptuelle S
忍受
发表于 2025-3-25 13:53:20
Biological Events Occuring on the Biosis–Abiosis Interface: Cellular Responses Induced by Implantablace area, surface functional groups, interconnected pores, and nano-scaled size. In this chapter, we reviewed the types of the nanofibrous scaffolds that have been used as implantable biomedical devices and used electrospun nanofibrous guided tissue regeneration membrane as an example to illustrate
Obsequious
发表于 2025-3-25 18:03:37
http://reply.papertrans.cn/48/4710/470922/470922_24.png
CLAP
发表于 2025-3-25 22:24:51
Surface Modification of Dental Implant Improves Implant–Tissue Interfaceants, which are partially exposed to the oral cavity, must have firm contact with tissues to prevent the bacterial infection. Such materials can be created under well-controlled conditions by modifying the surfaces that contact these tissues. The rough and grooved surfaced implant contributes to a m
Sarcoma
发表于 2025-3-26 00:19:56
http://reply.papertrans.cn/48/4710/470922/470922_26.png
innovation
发表于 2025-3-26 05:06:21
Biofunctionalization of Metallic Materials: Creation of Biosis–Abiosis Intelligent Interfacetion mechanism and titanium-tissue interface observation are reviewed to understand a concept to create biosis–abiosis intelligent interface. In addition, current status of surface treatment of metallic materials is reviewed. In particular, a gap between research level progress and commercialization
反馈
发表于 2025-3-26 11:13:12
http://reply.papertrans.cn/48/4710/470922/470922_28.png
DAUNT
发表于 2025-3-26 14:07:40
http://reply.papertrans.cn/48/4710/470922/470922_29.png
可卡
发表于 2025-3-26 20:20:32
Surface Improvement for Biocompatibility of Ti-6Al-4V by Dealloying in Metallic Meltion of specific element(s) by corrosion in acid/alkali aqueous solutions. Recently, an alternative dealloying method has been developed by our research group using a metallic melt in place of the corrosive aqueous solution. In this study, using the novel dealloying method using a metallic melt, toxi