Haphazard
发表于 2025-3-27 00:07:48
http://reply.papertrans.cn/47/4700/469921/469921_31.png
conformity
发表于 2025-3-27 01:29:13
http://reply.papertrans.cn/47/4700/469921/469921_32.png
Minuet
发表于 2025-3-27 06:54:48
http://reply.papertrans.cn/47/4700/469921/469921_33.png
航海太平洋
发表于 2025-3-27 09:38:14
A Study of Positioning Error Compensation Using Optical-Sensor and Three-Framerrow at holes in the grid-plate. From the suggested arrow position measurement system and the experiment data using the instrument, the automated system for quality control of arrows or performance experiment could be established.
EXCEL
发表于 2025-3-27 14:36:43
http://reply.papertrans.cn/47/4700/469921/469921_35.png
哀悼
发表于 2025-3-27 18:33:21
Stiffness Modeling and Optimization Analysis of a Novel 6-DOF Collaborative Parallel Manipulatoral analysis are conducted. First order of natural frequency optimization is established so that optimal radius of drive rod can be achieved. Comparing the results before and after optimization, it can be seen that performances are obviously improved.
PHAG
发表于 2025-3-27 23:15:11
http://reply.papertrans.cn/47/4700/469921/469921_37.png
雕镂
发表于 2025-3-28 04:39:06
http://reply.papertrans.cn/47/4700/469921/469921_38.png
勤劳
发表于 2025-3-28 06:32:48
Trajectory Planning with Bezier Curve in Cartesian Space for Industrial Gluing Robotd stability of velocity on the transition paths. Finally, a comparison of the performance both in joint space and Cartesian space between trajectory planning with cubic spline in joint space and that with Bezier curve in Cartesian space is presented to show the advantages of Bezier curve.
murmur
发表于 2025-3-28 11:36:50
CogRSim: A Robotic Simulator Software to Matlab; (3) the user can adjust the simulation speed, pause, restart, slower or faster; (4) some objects can be assembled into a complex one in arbitrary shape and unified physical attribute. CogRSim’s architecture and subsystems are described in detail, and then a navigation experiment is carried out to verify its usability.