冬眠
发表于 2025-3-23 09:59:27
http://reply.papertrans.cn/47/4699/469864/469864_11.png
Pessary
发表于 2025-3-23 16:59:49
2190-5053 th high moldability indices. Besides presenting important developments of relevance academic research, the book also includes useful information for people working in the injection molding industry, especially in the green manufacturing field..978-3-030-03356-9Series ISSN 2190-5053 Series E-ISSN 2190-5061
Shuttle
发表于 2025-3-23 19:54:54
https://doi.org/10.1007/978-3-030-03356-9Injection Molding Design; Defect Prediction in Injection Molding; Gate Systems for Scrap Reduction; Gat
FILLY
发表于 2025-3-23 23:43:48
http://reply.papertrans.cn/47/4699/469864/469864_14.png
牌带来
发表于 2025-3-24 02:46:25
Literature Review and Research Objectives,Injection molding is a significant manufacturing process which represents more than 70% of production among the components of consumer products.
Mendacious
发表于 2025-3-24 07:10:35
Modification of Cold Runner Design in Injection Molding Processes,The past century has observed the rapid increase of plastics and their proliferation into all markets. According to world consumption of raw materials by weight, plastic is the highest in comparison with other old materials such as aluminum, steel, rubber, copper, and zinc.
peak-flow
发表于 2025-3-24 13:23:35
The Analysis of Short Shot Possibility in Injection Molding Process,The most significant process for manufacturing the plastic is injection molding. Injection molding is considered for mass production of the complex geometry of plastic products which requires accurate dimensions.
eulogize
发表于 2025-3-24 17:31:53
Injection Molding Process Optimization Based on Fuzzy Quality Evaluation,In Chap. ., the proposed approach was designed to optimize .-. on the possibility of short shot defects in injection molding. The aim of this Chapter is to extend that approach to optimize a .-. problem in injection molding.
plasma-cells
发表于 2025-3-24 21:11:56
http://reply.papertrans.cn/47/4699/469864/469864_19.png
使残废
发表于 2025-3-25 01:52:33
Mehdi MoayyedianNominated as an outstanding PhD thesis by University of South Australia, Adelaide, Australia.Describes experimental, numerical and optimization techniques for improving mold design.Demonstrates the ef