Physiatrist
发表于 2025-3-27 00:19:34
Kurtosis Analysis of Tool Drilling Geometries and Cutting Conditions for Deep Twist Drilling Procesimal tool geometries are sharp point angle 115°, widen helix angle 35° and balanced clearance angle 120° from minimum kurtosis acceleration analysis and verified with signal processing analyses. The optimum tool geometries with process parameters can be determined based on minimum kurtosis value in
Chronic
发表于 2025-3-27 03:20:26
,Development of Ti50Ni50−XCox (X = 1 and 5 at. %) Shape Memory Alloy and Investigation of Input Proc of TiNiCo alloy to achieve a higher metal removal rate with a better surface finish. Response surface design (DOE) is applied for an experimental plan and created L-33 orthogonal array. Machining has been carried out of TiNiCo alloy as per the experimental plan and measured the machining responses
艺术
发表于 2025-3-27 07:58:54
Application Potential of Fuzzy Embedded TOPSIS Approach to Solve MCDM Based Problems, health care, business and manufacturing etc. This chapter highlights the utilization potential of Fuzzy embedded TOPSIS approach in clarifying different MCDM-based obstacles correlated witha real time manufacturing system and other relevant sectors as well. A case study consisting of experimental d
保守
发表于 2025-3-27 11:53:10
Multi-criteria Decision Making Through Soft Computing and Evolutionary Techniques,meter determination and prediction of results in machinability studies. Throughout this chapter, research based on the studies on multi-criteria decision-making tools is discussed. Moreover, various characteristics and difference among these tools are also reported.
ENACT
发表于 2025-3-27 14:29:20
http://reply.papertrans.cn/47/4699/469802/469802_35.png
天然热喷泉
发表于 2025-3-27 17:50:37
Hybrid Approach for Prediction and Modelling of Abrasive Water Jet Machining Parameter on Al-NiTi Cveness of the hybrid algorithm in predicting and optimizing the Abrasive Water Jet Machining (AWJM) parameters. Grey Relational Analysis (GRA) is used as a feature selection and optimizing tool. The result of feature selection by GRA–Entropy, reveals that the most influencing control variables are r
低能儿
发表于 2025-3-27 22:01:31
Hargovind Soni,S. Narendranath,M. R. Ramesh,Dumitru Nedelcu,P. Madindwa Mashinini,Anil Kumar
尾巴
发表于 2025-3-28 05:39:32
http://reply.papertrans.cn/47/4699/469802/469802_38.png
健谈
发表于 2025-3-28 08:50:30
http://reply.papertrans.cn/47/4699/469802/469802_39.png
远足
发表于 2025-3-28 11:03:00
http://reply.papertrans.cn/47/4699/469802/469802_40.png