impale
发表于 2025-3-25 05:20:09
Tetyana Baydyk,Ernst Kussul,Donald C. Wunsch IImen (Baustähle nach DIN EN 10025), Vergütungsstählen nach DIN EN 10025-6 und DIN EN 10083, hochlegierten Stählen nach DIN EN 10 088 und Zusatzwerkstoffen zum Schweißen von Stählen nach DIN EN ISO 2560. .978-3-642-03183-0Series ISSN 2512-5281 Series E-ISSN 2512-529X
猛然一拉
发表于 2025-3-25 10:41:16
Tetyana Baydyk,Ernst Kussul,Donald C. Wunsch IImen (Baustähle nach DIN EN 10025), Vergütungsstählen nach DIN EN 10025-6 und DIN EN 10083, hochlegierten Stählen nach DIN EN 10 088 und Zusatzwerkstoffen zum Schweißen von Stählen nach DIN EN ISO 2560. .978-3-642-03183-0Series ISSN 2512-5281 Series E-ISSN 2512-529X
BALK
发表于 2025-3-25 15:26:40
http://reply.papertrans.cn/47/4694/469369/469369_23.png
王得到
发表于 2025-3-25 19:17:13
Heat Engines,lize this idea, it is necessary to develop the Ericsson cycle heat engine (ECHE). This book’s authors propose a structure of this engine . A computer simulation was designed to evaluate the Ericsson engine parameters, and the obtained results are discussed in this chapter.
机密
发表于 2025-3-25 22:25:50
http://reply.papertrans.cn/47/4694/469369/469369_25.png
calumniate
发表于 2025-3-26 00:11:45
http://reply.papertrans.cn/47/4694/469369/469369_26.png
BLAND
发表于 2025-3-26 08:01:37
Computer Intelligent Systems for Manufacture and Control,tive Area) neural network and its application to measure the micro piston size. To obtain micro piston sizes, it is necessary to recognize its boundaries in the image. We propose to use LIRA neural network to extract and classify piston boundaries. In this chapter, we describe and analyze the prelim
cocoon
发表于 2025-3-26 12:00:31
http://reply.papertrans.cn/47/4694/469369/469369_28.png
OCTO
发表于 2025-3-26 14:19:27
Tetyana Baydyk,Ernst Kussul,Donald C. Wunsch IIlesenen kontrolliert werden kann. Diese Beispiele (bzw. ihre Lösungen) sind deshalb so hilfreich, weil sie auf meist nicht offenkundige Zusammenhänge hinweisen. An den Kapitelenden findet der int978-3-540-35051-4Series ISSN 2512-5281 Series E-ISSN 2512-529X
放逐
发表于 2025-3-26 20:39:31
Tetyana Baydyk,Ernst Kussul,Donald C. Wunsch IIlesenen kontrolliert werden kann. Diese Beispiele (bzw. ihre Lösungen) sind deshalb so hilfreich, weil sie auf meist nicht offenkundige Zusammenhänge hinweisen. An den Kapitelenden findet der int978-3-540-35051-4Series ISSN 2512-5281 Series E-ISSN 2512-529X