谈判
发表于 2025-3-25 05:44:25
Investigation of Mechanical Properties and Failure Behaviour of CFRP, C/C and C/C-SiC Materials Fabr structural components in high-temperature applications. The liquid-silicon infiltration (LSI) process is a cost-efficient manufacturing route for fibre-reinforced ceramics consisting of three processing steps. A carbon-fibre-reinforced plastic (CFRP) composite is fabricated, which is converted in a
使绝缘
发表于 2025-3-25 09:24:02
Investigation of Polymer Melt Impregnated Fibre Tapes in Injection Moulding Process the present paper, the polymer melt impregnation of fibre bundles in injection moulding process is investigated by a specific pull-out test which allows the preparation of the investigated specimen near to process. Several glass fibre roving types with varying appearance and yarn count were placed
Supplement
发表于 2025-3-25 12:45:41
Numerical Analysis of Relaxation Test Based on Prony Series Material Modeln addition to the specimen size in case of nonlinear materials could be even more effective. Hence, a full analysis of these parameters before doing any test on the real material seems necessary. In this paper, these effects are numerically analyzed, using ANSYS APDL coding. Samples are cylindrical
PALSY
发表于 2025-3-25 17:02:16
http://reply.papertrans.cn/47/4687/468664/468664_24.png
向外供接触
发表于 2025-3-25 22:55:17
http://reply.papertrans.cn/47/4687/468664/468664_25.png
空洞
发表于 2025-3-26 02:44:01
http://reply.papertrans.cn/47/4687/468664/468664_26.png
乐章
发表于 2025-3-26 04:57:49
http://reply.papertrans.cn/47/4687/468664/468664_27.png
多余
发表于 2025-3-26 09:19:09
Structural Optimization of Fibre-Reinforced Composites for Ultra-Lightweight Vehicleses are not fully reflected in the design. Instead, to be on the safe side, more or thicker material has been used. The numerical structural optimization is a way to calculate the optimal load-dependent material distribution or fibre orientation in complex fibre-reinforced components. This method was
动机
发表于 2025-3-26 16:40:22
Optimisation and Characterisation of Magnetoelastic Microsensorsde of composite materials, known as structural health monitoring, is of growing interest. Certainly, composite parts with high demands on safety and a long economic life-time, e. g. parts in airplanes and blades of wind turbines, will be equipped with strain- and impact-sensitive sensors in future.
ALB
发表于 2025-3-26 17:27:53
http://reply.papertrans.cn/47/4687/468664/468664_30.png