谈判
发表于 2025-3-27 00:27:07
https://doi.org/10.1007/978-3-031-36201-9Integrated Computer Technologies in Mechanical Engineering; Synergetic Engineering; ICTM2022; Mechanica
龙卷风
发表于 2025-3-27 04:32:57
Estimation of the Minimum Uncut Chip Thickness Utilising Conventional Milling of S960QL and C45E Ste, where the minimum uncut chip thickness presents itself as a technical limit of removing chip in a controllable way. The following research aims to estimate the minimum uncut chip thickness and how it is affected by the cutting speed and the feed per cutting edge utilising conventional milling with a conventional-sized end mill.
infinite
发表于 2025-3-27 09:09:45
http://reply.papertrans.cn/47/4685/468471/468471_33.png
删除
发表于 2025-3-27 09:50:31
Experimental Setup with Stand-Alone Automatic Modular Logger of Parameters of Thermal Pulse Processiing of sensors and storage of the experimental measurements for further analysis and processing has been developed. Thirdly, an experimental setup, consisting of the experimental chamber with a data logger inside, attached through an accelerating tube to a shock wave generator or a pulse-compression
Statins
发表于 2025-3-27 14:14:23
http://reply.papertrans.cn/47/4685/468471/468471_35.png
泥瓦匠
发表于 2025-3-27 20:09:46
http://reply.papertrans.cn/47/4685/468471/468471_36.png
变量
发表于 2025-3-28 01:02:01
Adhesive Joint Optimization. Application of Bezier Curves for Structural Shape Descriptionng: on one of «islands» mutations occur more frequently and more dispersion comparing with two other «islands». Such combination ensures quick evolution selection and stability of obtained results. Model problem is solved.
Merited
发表于 2025-3-28 02:27:38
http://reply.papertrans.cn/47/4685/468471/468471_38.png
Galactogogue
发表于 2025-3-28 09:44:42
Influence of Physico-Mechanical Factors on Residual Technological Stresses and Strains of Compositethe prefabricated structure after its release from the moulding tool. It is assumed that the panel is moulded of six monolayers at the temperature of 100ºC. Based on our studies, we obtained the dependence, which allowed us to predict the index of maximum stress at the critical point of the composi
deadlock
发表于 2025-3-28 13:58:36
http://reply.papertrans.cn/47/4685/468471/468471_40.png