fructose
发表于 2025-3-28 17:54:56
http://reply.papertrans.cn/47/4685/468470/468470_41.png
CARK
发表于 2025-3-28 20:15:41
Simulation of Aircraft Motion in a Corkscrew Taking into Account Nonlinear Effects of Rotationcomponents of the selected nonlinearity, the calculation of which by other methods is almost impossible. At the end of the article, the modes of corkscrew motion are modeled. The comparative analysis of this movement with real records of registrars of flight parameters is resulted.
MAIZE
发表于 2025-3-29 02:06:35
Considering the Meteorological Elements for the Aerial Vehicles Flight by Using “Weight” Functionsfluence of meteorological elements on the flight of the aerial vehicles with empennage by using the “weight” functions of these elements. “Weight” function can be represented analytically or graphically. The way of determining the average ballistic meteorological elements for aerial vehicles within
mechanical
发表于 2025-3-29 03:48:28
http://reply.papertrans.cn/47/4685/468470/468470_44.png
Arable
发表于 2025-3-29 10:40:26
http://reply.papertrans.cn/47/4685/468470/468470_45.png
Daily-Value
发表于 2025-3-29 15:09:02
http://reply.papertrans.cn/47/4685/468470/468470_46.png
昏睡中
发表于 2025-3-29 17:11:33
http://reply.papertrans.cn/47/4685/468470/468470_47.png
有助于
发表于 2025-3-29 21:46:42
2367-3370 ld in Kharkov, Ukraine, at November 28–29, 2021.Written by l.The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering” – Synergetic Engineering (ICTM) was established by National Aerospace University “Kharkiv Aviation Institute”.. .The Confere
maculated
发表于 2025-3-29 23:54:32
http://reply.papertrans.cn/47/4685/468470/468470_49.png
多嘴多舌
发表于 2025-3-30 06:30:00
Stress-Strain State of a Double Lap Joint of Circular Form. Axisymmetric Modelat tangential stresses achieve a maximum at a distance of about the thickness of the adhesive layer from the joint edge. Normal stresses are of the same order as that of the tangential ones. The results obtained were compared with those of finite-element modelling. The comparison demonstrated high accuracy of the suggested model.