HACK
发表于 2025-3-27 00:01:32
http://reply.papertrans.cn/47/4685/468468/468468_31.png
有害处
发表于 2025-3-27 03:23:48
http://reply.papertrans.cn/47/4685/468468/468468_32.png
Custodian
发表于 2025-3-27 08:05:26
http://reply.papertrans.cn/47/4685/468468/468468_33.png
corpuscle
发表于 2025-3-27 12:43:54
http://reply.papertrans.cn/47/4685/468468/468468_34.png
insightful
发表于 2025-3-27 15:15:53
http://reply.papertrans.cn/47/4685/468468/468468_35.png
上坡
发表于 2025-3-27 21:24:44
http://reply.papertrans.cn/47/4685/468468/468468_36.png
medieval
发表于 2025-3-27 23:43:34
http://reply.papertrans.cn/47/4685/468468/468468_37.png
pellagra
发表于 2025-3-28 02:24:58
New Possibilities of Creating the Efficient Dimensionally Stable Composite Honeycomb Structures for cts generated during the manufacturing process in the form of continuous and discrete strips of thin load-bearing skins of CFRP (carbon fiber reinforced plastic) were also investigated. With the use of the analytical methods supported by finite element method, the integrated study of the adhesive jo
wangle
发表于 2025-3-28 08:36:57
Light Civil Turboprop Airplane Take-Off Weight Preliminary Design Estimation Method To implement the take-off weight calculation method, software has been developed. It allows studying the influence of the wing geometric parameters (such as aspect ratio (.), taper ratio (.), airfoil relative thickness (.) and sweep angle (.)) on aerodynamic performance, power-to-weight ratio and a
悲痛
发表于 2025-3-28 10:30:27
The Nonuniform in Width Stressed State of the Lap Adhesive Jointal solution to the problem. The stressed state problem for the adhesive joint of two rectangular plates, one of which is rigidly fixed along one of the sides, and the second plate is loaded with an nonuniform normal load at one of the butts, is solved. The problem is reduced to a system of second-or