Corroborate
发表于 2025-3-23 11:57:31
D. Sakthivadivel,P. Ganesh Kumar,G. Praveen Kumar,P. Raman,Ranko Goic,S. Iniyan
exceptional
发表于 2025-3-23 16:27:31
http://reply.papertrans.cn/47/4674/467367/467367_12.png
摊位
发表于 2025-3-23 20:32:59
Rahul Jagtap,Vikas Sisodia,Kiran More,Shailendra Kumar
先驱
发表于 2025-3-24 01:46:54
http://reply.papertrans.cn/47/4674/467367/467367_14.png
值得
发表于 2025-3-24 04:02:06
http://reply.papertrans.cn/47/4674/467367/467367_15.png
逃避系列单词
发表于 2025-3-24 08:15:48
3D Digitizing Practice-Advantage in Reverse Engineering with Accuracy Boost,m the method, complicated state of IC motor cylinder is digitized by utilizing a CMM. Examined crude information is spared in point document arrangement and it is moved to CAD virtual products to create cloud focuses. Smooth parametric surfaces were gotten with the help of fitting of B-splines bends
Axillary
发表于 2025-3-24 14:30:40
Exploratory and Numerical Examination of Blending of Four Planar Parallel Planes,eld is featured in this examination. The outcomes acquired from both test and numerical strategies have been contrasted and found with be concurred. A couple of symmetrical stable vortices has been shaped. The union point and the consolidated point have been found to happen on the hub of symmetry. T
peritonitis
发表于 2025-3-24 14:53:32
Optimization and Analysis of Front Telescopic Suspension for Electric Bike to Have Comfortable Ridedifferent set of attachments and classified them as traditional and optimized one to achieve the desired objectives. To compare the traditional and optimized suspension system, transmissibility analysis at bump size of 10 cm and 3 cm is carried out and corresponding stress developed in shackle plate
Charitable
发表于 2025-3-24 22:33:14
CFD Analysis on Extrusion of Slurry in Direct Ink Writing,f increase in the speed of screw spindle and varying mass flow rate. Experiments are performed to measure the viscosity of the slurry with respect to shear rate. Theoretical calculations are compared with CFD analysis results and they are in good agreement in predicting the inlet pressure.
Mutter
发表于 2025-3-25 02:51:25
Experimental and Numerical Study on Temperature Distribution of Infrared Heater Used for Curing Solt software was used to develop a numerical model based on the control volume method and to simulate the temperature distribution of the part. The simulation results and the thermal imaging measurement value showed good agreement.