Mawkish
发表于 2025-3-27 00:25:52
Design and Analysis of Anti-intrusion Beams for Car Door, check the reliability of different cross sections, an explicit dynamic analysis of these beams is done in ANSYS 2019 R2. The material used for the analysis of beams is aluminum 2024-T3. The effectiveness of the result is then checked on the car door by doing a side impact simulation against the steel column.
forthy
发表于 2025-3-27 01:11:06
Structural Analysis and Topology Optimization of Base of Revolving Chair,al analysis that is carried out with different materials like polypropylene, aluminum, and stainless steel to check the reliability of the enhanced optimized model. The parameters such as stresses and deformation are used to get the optimal topology and also to validate the enhanced geometry.
昏睡中
发表于 2025-3-27 08:50:21
http://reply.papertrans.cn/47/4672/467146/467146_33.png
Nomadic
发表于 2025-3-27 11:14:06
Buckling Analysis of Thin Isotropic Square Plate with Rectangular Cut-Out, in thickness of plate, variation in aspect ratio of cut-out and variation in orientation of cut-out. Classical plate theory is used for analytical formulation and finite element analysis is carried out in Ansys software.
Charade
发表于 2025-3-27 16:07:25
Modelling and Analysis of a Two-Stage Gearbox,ning of gears and shafts, whereas sequential approach thereafter for the design of casing geometry. The product was designed in accordance with the American Gear Manufacturers Association (AGMA) standards and is meant for off-road application.
否认
发表于 2025-3-27 18:01:44
Vibrational Analysis of Circular Plates with Square Cutout, plates under different modes of vibrations are also tested and tabulated. The frequencies of non-perforated plate increase with increase in height of plate and decrease with increase in radius of plate. In plates with square cutout, the frequencies exhibited a wave-like trend as the cutout dimension was varied.
offense
发表于 2025-3-27 22:04:09
Design and Analysis of E-Kisan Multi-Tool Machine,. Then, analysis operations are performed on the tools to check the effect on the tool because of the axial loading and its functional deflections, and it is found that has with-stand ability when forces are applied. This evaluation helps in practical implementation of the tool.
珐琅
发表于 2025-3-28 04:33:42
http://reply.papertrans.cn/47/4672/467146/467146_38.png
chalice
发表于 2025-3-28 07:07:05
2195-4356engineering, thermal engineering.Presents select proceedingThis book comprises select proceedings of the International Conference on Innovations in Mechanical Engineering (ICIME 2021). It presents innovative ideas and new findings in the field of mechanical engineering. Various topics covered in th
河潭
发表于 2025-3-28 13:22:16
http://reply.papertrans.cn/47/4672/467146/467146_40.png