glamor
发表于 2025-3-27 00:10:22
http://reply.papertrans.cn/47/4672/467145/467145_31.png
倒转
发表于 2025-3-27 04:07:53
http://reply.papertrans.cn/47/4672/467145/467145_32.png
针叶树
发表于 2025-3-27 07:40:23
http://reply.papertrans.cn/47/4672/467145/467145_33.png
物质
发表于 2025-3-27 10:12:17
Synthesis of Ceramic Powders and Surface Films From Laser Heated Gasesratures while operating in a conventional thermally activated CVD mode. For hydrogenated amorphous silicon films, this is particularly important because deposition rates are determined by the high gas temperatures and film properties by the low substrate temperatures. Spin density, hydrogen content,
Mutter
发表于 2025-3-27 13:57:14
Affordability Through Technology: Bridging the Gapd on the drawing boards in the early 1970’s, and we are just now in the process of transitioning them to Procurement and Production. As we are transitioning these new systems to production we are also experiencing substantial cost growths.
地牢
发表于 2025-3-27 21:28:38
Manufacturing and Productivityithin the next s;everal years. In order to increase the productivity, the value added (i.e., selling price) must be maximized and the manufacturing cost must be minimized. Both of these depend on the quality of products and processes, which in turn depend on the design decisions made during the prod
Fsh238
发表于 2025-3-28 00:44:48
http://reply.papertrans.cn/47/4672/467145/467145_37.png
alleviate
发表于 2025-3-28 03:14:52
Modeling of Organic Materials Processingf predicting velocities, temperatures, stresses, and extents of chemical conversion in a variety of reactive polymer processes. The analysis accounts for diffusive, convective, and generation effects and also deals with transient situations..After a brief introduction on the benefits of modeling pol
jagged
发表于 2025-3-28 09:45:49
Weld Quality Monitor and Control System and conditions which lead to weld defects in real time. The WQM continually measures with conventional transducers all primary process parameters such as current, voltage, and travel speed, and computes weld quality parameters such as heat input and weld bead geometry. In addition, the WQM monitors
faucet
发表于 2025-3-28 11:17:09
Hot Rolling Simulation of Electromagnetically Cast and Direct-Chill Cast 5182 Aluminum Alloy by Hot ot working parameters such as reduction schedule, rolling speed, allowable extrusion ratio, extrusion speed, and working temperature to maximize productivity. In addition, it is important to hot work a metal a) in a microstructural condition that lends itself to easy hot working, e.g., properly homo