执
发表于 2025-3-28 15:22:21
Precision Cold Forging - Methods for Reduction of Working Pressurenents and increased tool life. The purpose of this paper is to review 3 proposed methods of reducing working pressure during cold forging. These methods were studied by conducting tests using force profiles measurement system, finite element study and metallurgical evaluation.
PHON
发表于 2025-3-28 20:01:20
Burr Formation in Micro-machining Aluminum, 6061-T6d depths of cut using a tool of . diameter were considered. Drilling experiments with different feed to diameter ratios, cutting speeds and two drill diameters were conducted. The influence of the cutting parameters on burr size and burr type was observed. A comparison to burr formation in conventional machining is presented.
FORGO
发表于 2025-3-28 23:52:58
A Method to Machine Three-dimensional Thin Parts force used during machining. The developed method uses a low melting alloy (LMA) to machine three-dimensional thin parts without deformation. The parts are firmly supported and fixed on the LMA by adhesion or suction force. The method and some results are described.
Misnomer
发表于 2025-3-29 04:39:23
http://reply.papertrans.cn/47/4666/466502/466502_44.png
reptile
发表于 2025-3-29 09:00:10
http://reply.papertrans.cn/47/4666/466502/466502_45.png
scrutiny
发表于 2025-3-29 12:29:00
http://reply.papertrans.cn/47/4666/466502/466502_46.png
archenemy
发表于 2025-3-29 18:30:07
http://reply.papertrans.cn/47/4666/466502/466502_47.png
ineptitude
发表于 2025-3-29 23:04:50
http://reply.papertrans.cn/47/4666/466502/466502_48.png
责任
发表于 2025-3-30 02:25:20
Coining of Thin Plates to Produce Micro Channel Structures products and microscopic geometric details. A typical example are thin plates (thickness < 1 mm) with microscopic channel structures, which are required for micro heat exchangers, chemical micro reactors or other applications. In coining experiments sheet specimens from 0.5 to 0.8 mm thickness have
组成
发表于 2025-3-30 06:19:32
http://reply.papertrans.cn/47/4666/466502/466502_50.png