贫困
发表于 2025-3-30 10:33:23
http://reply.papertrans.cn/47/4641/464049/464049_51.png
intricacy
发表于 2025-3-30 14:29:50
Marcin Płodzień,Jarosław Tymczyszyn,Witold Habrat,Piotr Kręcichwostg sets of digitized SFMs publicly available and/or a private database of FFDMs. Also, validation by expert radiologists was needed. Each of the various tasks addressed, in particular, has required the selection of specific sets of mammograms for the following reasons: (1) optimization of the cross-v
FILTH
发表于 2025-3-30 16:38:15
http://reply.papertrans.cn/47/4641/464049/464049_53.png
纯朴
发表于 2025-3-30 21:10:26
http://reply.papertrans.cn/47/4641/464049/464049_54.png
丧失
发表于 2025-3-31 00:55:25
Mathematical Modelling of Core Roughness Depth During Hard Turning,s, using nonlinear function shape and a four-factorial plan experiments of the first order. The independent mathematical modelling input parameters comprise cutting speed (.), feed (.), tool nose radius (.) and depth of cut (.), with repetition in the middle point of the investigated hyperspace. The
Recessive
发表于 2025-3-31 06:36:46
http://reply.papertrans.cn/47/4641/464049/464049_56.png
Pseudoephedrine
发表于 2025-3-31 11:45:32
Evaluation of Deflection of Thin-Walled Profile During Milling of Hardened Steel,ng the cutting of thin-walled elements, there is a probability of their deflection, which is connected with dimensional errors of the made elements. The tests included measurement of the components of the total cutting force using a piezoelectric accelerator, and deflections of a thin-walled element
雀斑
发表于 2025-3-31 16:54:25
http://reply.papertrans.cn/47/4641/464049/464049_58.png
高度
发表于 2025-3-31 19:08:09
Surface Roughness Analysis After Milling Aluminum-Ceramic Composite,ed out on a DMC 70V DECKEL MAHO machining center, and the cutting tools were CBN and PCD cutters. The tests were carried out with variable cutting speeds and variable feeds with ant without presence of cutting fluids. For surface roughness analysis the ., . and . parameters were selected. The analys
LIMIT
发表于 2025-3-31 23:27:11
Technological Aspects of Regeneration of Carbide End Mills, angle . and cutting edge radius .) of commercial and regenerated mills. The measurements were taken for the initial cutting edge wear and after 30 min of machining. In addition, a visual evaluation of the cutting edge state of new and regenerated cutters before and after machining was made. There w