conspicuous
发表于 2025-3-25 05:19:53
nd 29 MPa) had generally the same type of the oxide structure, i.e., a Cr-rich oxide with the spinel structure on outer surface adjacent to the water phase. The material exposed at 8 and 29 MPa had a double layer oxide structure, with the outer oxide layer having a much larger grain size, while the
COMMA
发表于 2025-3-25 09:49:46
Robert Goldingase of the mechanical properties of thermally cycled specimens compared to isothermally aged ones. A close investigation showed that the γ″ phase grows by ledge mechanism. Moreover, Electron backscattered diffraction analysis (EBSD) revealed no significant grain size change during all annealed times
陈腐的人
发表于 2025-3-25 11:52:32
Robert Goldingase of the mechanical properties of thermally cycled specimens compared to isothermally aged ones. A close investigation showed that the γ″ phase grows by ledge mechanism. Moreover, Electron backscattered diffraction analysis (EBSD) revealed no significant grain size change during all annealed times
adumbrate
发表于 2025-3-25 17:47:06
http://reply.papertrans.cn/47/4611/461066/461066_24.png
左右连贯
发表于 2025-3-25 22:43:12
Robert Goldingase of the mechanical properties of thermally cycled specimens compared to isothermally aged ones. A close investigation showed that the γ″ phase grows by ledge mechanism. Moreover, Electron backscattered diffraction analysis (EBSD) revealed no significant grain size change during all annealed times
MULTI
发表于 2025-3-26 04:08:12
Robert Goldingase of the mechanical properties of thermally cycled specimens compared to isothermally aged ones. A close investigation showed that the γ″ phase grows by ledge mechanism. Moreover, Electron backscattered diffraction analysis (EBSD) revealed no significant grain size change during all annealed times
plasma
发表于 2025-3-26 06:25:31
http://reply.papertrans.cn/47/4611/461066/461066_27.png
CHARM
发表于 2025-3-26 10:00:53
Robert Goldingermined to be the differentiating factor, and responsible for the difference in dielectric constant between the injection molding and cast film extrusion processes. The resulting dielectric constant is a function of this volume fraction with a near linear relationship.
libertine
发表于 2025-3-26 12:39:59
cs, clays, soft materials, method development, processing, corrosion, welding, solidification, composites, extraction, powders, nanomaterials, advanced materials, and several others..978-3-319-84635-4978-3-319-51382-9Series ISSN 2367-1181 Series E-ISSN 2367-1696
Heart-Rate
发表于 2025-3-26 17:18:19
Palgrave Macmillan, a division of Macmillan Publishers Limited 1985