磨坊
发表于 2025-3-25 06:46:55
Steady-State Dynamics of Two Nonlinear MDOF Mechanical Engineering Systems, Typically, the models of these systems are characterized by many degrees of freedom (mdof), whereas the nonlinearities are only connected to a limited number of those degrees of freedom. The key issue in the analysis method is the integration of the finite element technique with numerical tools for
Connotation
发表于 2025-3-25 10:51:15
http://reply.papertrans.cn/47/4606/460546/460546_22.png
树上结蜜糖
发表于 2025-3-25 13:57:31
http://reply.papertrans.cn/47/4606/460546/460546_23.png
CAMEO
发表于 2025-3-25 19:17:20
,Nonlinear Dynamics of Three-Degree-of-Freedom Manipulator’s Model,of optimal robots velocities and motion accuracy . Using powerful computers, it is possible to use dynamical manipulator’s model as a “heart” of a control algorithm. That dynamical model should predict optimal control of the manipulator’s elements in order to reduce usually complicated and harm
sphincter
发表于 2025-3-25 20:43:45
http://reply.papertrans.cn/47/4606/460546/460546_25.png
说明
发表于 2025-3-26 02:20:51
http://reply.papertrans.cn/47/4606/460546/460546_26.png
大量
发表于 2025-3-26 08:07:02
Nonlinear Vibration Analysis of Machine Oil Viscosity,elastic system from linear into the nonlinear one. Mathematically the problem is presented as a set of nonlinear partial differential equations describing transverse forced vibrations of four elastic elements (tensioned strings) connected with the working mass of viscometer and interacting with a ma
广告
发表于 2025-3-26 11:56:07
http://reply.papertrans.cn/47/4606/460546/460546_28.png
整顿
发表于 2025-3-26 13:01:50
An Asymptotic Numerical Method to Compute Stationary Navier-Stokes Solutions and Bifurcation Pointsponds to a transition between a stationary solution and a time-periodic one (J.E. Marsden and M.McCracken, 1976). The solutions of the stationary Navier-Stokes are determined with an Asymptotic-Numerical Method (N. Damil and M. Potier-Ferry, 1990) which is a combination between a perturbation techni
灌溉
发表于 2025-3-26 20:02:38
On Nonlinear Vibration of Nonuniform Beam with Rectangular Cross-Section and Parabolic Thickness Va using the factorization method. This beam with constant width and parabolic thickness is a good approximation of the gear tooth profile. It permits a nonlinear bending vibrations study (moderately large curvatures) of the gear tooth (the cantilever beam case). The case of the beam with a sharp end