Anthrp
发表于 2025-3-26 23:04:06
Application of the Rappaz-Drezet-Gremaud Hot Tearing Criterion to Welding of Aluminium Alloys the influence of the mechanical behaviour of the mushy alloy on the risk of hot cracking (thermo-mechanical criterion)..Each level is illustrated by an example dealing with laser beam welding. Nevertheless, one of the critical issues in the RDG approach is the definition of a coherency point which,
真
发表于 2025-3-27 02:48:31
http://reply.papertrans.cn/43/4285/428433/428433_32.png
NICHE
发表于 2025-3-27 06:19:49
http://reply.papertrans.cn/43/4285/428433/428433_33.png
considerable
发表于 2025-3-27 09:54:53
http://reply.papertrans.cn/43/4285/428433/428433_34.png
CRACK
发表于 2025-3-27 17:29:32
http://reply.papertrans.cn/43/4285/428433/428433_35.png
grenade
发表于 2025-3-27 18:54:26
Hot Cracking Susceptibility of Ni-Base Alloy Dissimilar Metal Weldsy 52 > Alloy 182 > Alloy 82, while in pure (undiluted) weld metal hot cracking tests the susceptibility followed the order: Alloy 182 ≥ Alloy 152 > Alloy 52 ≥ Alloy 82. The differences are thought to be related to dilution effects in mock-up welds because Fe, Si, and C enhance the eutectic phases an
gait-cycle
发表于 2025-3-28 00:34:22
Evaluation of Weld Solidification Cracking in Ni-Base Superalloys Using the Cast Pin Tear Testigh and medium temperature regime of solidification cracks generated using the Varestraint test. The nature of crack nucleation and propagation, and the crack healing phenomenon in CPTT closely resemble weld solidification cracking..The CPTT technique was applied for evaluating the solidification cr
锯齿状
发表于 2025-3-28 04:21:15
SAW Cold Wire Technology – Economic Alternative for Joining Hot Crack Sensitive Nickel-Base Alloysher hot cracking resistance by reduced heat input. Apart from the high weld quality which is a result of submerged-arc welding, the economic efficiency which is particularly marked by the high deposition rates is also interesting..Submerged-arc welding knows different possibilities of reducing the e
无动于衷
发表于 2025-3-28 08:44:11
The Integral Approach – a Tailored Method to Optimize Structural Behavior and Weldabilitystringer web..From the technical welding experiences points to the tendency that the weld seam cracks may be reduced by the so called clamping effect. A tailored welding strategy in combination with slots leads to desired residual compressive stresses in several particular stringer parts. These stre
Spina-Bifida
发表于 2025-3-28 12:14:33
Weld Parameter and Minor Element Effects on Solidification Crack Initiation in Aluminiumd their influence on cracking has been characterized. These parameter influences have included studies of weld travel speed, weld pool contaminants (Fe, O, and H), and grain refiner additions (TiAl. + Boron). Each parameter has been independently varied and its effect on cracking susceptibility quan