叙述
发表于 2025-3-25 11:11:37
H. Heuser selten; bisher wurden ca. 50 verschiedene solche Syndrome beschrieben (Kiess et al. 2009; Weihrauch-Blüher und Vilser 2018). Sie zeichnen sich durch weitere spezifische klinische Merkmale aus und es bestehen ein charakteristisches Präsentationsalter sowie ein spezifischer Phänotyp.
GROG
发表于 2025-3-25 15:42:09
http://reply.papertrans.cn/43/4285/428432/428432_23.png
Engulf
发表于 2025-3-25 16:01:44
B. Yakhushin,D. Seminols a viable alternative to the “wait-and-fail” model that traditionally has been used to identify struggling students..Schools’ efforts can be further strengthened by coordinating and collaborating with community partners, especially those in the mental health and public health fields. Through shar
愤慨一下
发表于 2025-3-25 22:56:41
Book 2005s how numerical analyses and other modelling techniques can be utilized to describe hot cracking phenomena and how such results might contribute to the explanation of the mechanisms. Various hot cracking test procedures are presented in the final chapter with a special emphasis on standardization. F
迅速成长
发表于 2025-3-26 02:23:56
The Effect of Silicon and Iron on the Weldability of Ni-Co-Cr-Si HR-160® Alloyusceptibility of the alloy to solidification cracking, with silicon having the predominant influence. The detrimental effect that silicon caused was the increase in the solidification temperature range of the alloy, which in turn increased the brittle temperature range of the alloys. On the other ha
勤勉
发表于 2025-3-26 05:47:28
Hot Cracks as Stress Corrosion Cracking Initiation Sites in Laser Welded Corrosion Resistant Alloysess steel AISI 309 (German No. 1.4828). The susceptibility of such hot crack afflicted laser welds to stress corrosion cracking (SCC) significantly depends on temperature and chloride concentration of the test environment In comparison, the high nitrogen austenitic stainless steel AISI S 34565 (Germ
使厌恶
发表于 2025-3-26 10:27:11
http://reply.papertrans.cn/43/4285/428432/428432_28.png
言行自由
发表于 2025-3-26 15:01:31
Influence of the Weld Pool Geometry on Solidification Crack Formationure, an increased rate of shrinkage can be predicted on the basis of a geometrical Rate of Feeding (ROF) Rate of Shrinkage (ROS) model, corresponding to the measured positions of the solidification cracks. The assumption of position-dependent strain and strain rates along the solidification front du
phlegm
发表于 2025-3-26 20:39:57
Recent Developments in Weldability Testingse forms of cracking. This description will include the use of the Varestraint test, the cast pin tear test, and the Gleeble1 thermo-mechanical simulator for quantifying cracking susceptibility and providing comparative measures of weldability among alloys.
箴言
发表于 2025-3-27 00:43:14
Influence of the Deformation Rate of Different Tests on Hot Cracking Formationabout 50 mm/s, the Russian method heats all round tensile specimens to the same maximum temperature just above the melting point and loads each specimen at another tension speed between 0.01 and 0.1 mm/s for approximation of the critical tension speed..For tensile test comparison, the PVR test is ca