免费
发表于 2025-3-27 00:50:09
Analysis of Temperature Concentration During Single Layer Metal Deposition Using GMAW-WAAM: A Case acturing industry. The quality of fabricated parts using GMAW-WAAM largely depends on different process parameters and temperature/heat generation during the process. The dissemination of temperature in the process is considerably affected by path planning. Eventually, the overall precision and the
nominal
发表于 2025-3-27 03:55:12
http://reply.papertrans.cn/43/4267/426644/426644_32.png
纹章
发表于 2025-3-27 09:00:47
Enhancing the Fracture Toughness of Biomimetic Composite Through 3D Printing,istic, making it difficult to improve both at the same time. Here, a biomimetic composite is proposed to increase both the strength and toughness with in-plane isotropy. The optimal rotational angle, ultimate strength and toughness can be improved around 100%, respectively, along with good in-plane
FIS
发表于 2025-3-27 11:01:12
http://reply.papertrans.cn/43/4267/426644/426644_34.png
irreducible
发表于 2025-3-27 13:37:19
Study of Mechanical Properties and Applications of Aluminium Based Composites Manufactured Using Lacomponents. This chapter explores the laser-based additive techniques and the factors that make them superior compared to conventional techniques. Both the in-situ and ex-situ reinforced metal matrix composites can be manufactured using additive manufacturing efficiently and can achieve higher mecha
带来
发表于 2025-3-27 18:57:45
http://reply.papertrans.cn/43/4267/426644/426644_36.png
前奏曲
发表于 2025-3-27 22:02:19
http://reply.papertrans.cn/43/4267/426644/426644_37.png
CLAIM
发表于 2025-3-28 03:50:05
http://reply.papertrans.cn/43/4267/426644/426644_38.png
离开真充足
发表于 2025-3-28 07:39:51
http://reply.papertrans.cn/43/4267/426644/426644_39.png
legislate
发表于 2025-3-28 12:26:22
http://reply.papertrans.cn/43/4267/426644/426644_40.png