Apogee
发表于 2025-3-25 06:44:07
http://reply.papertrans.cn/43/4267/426642/426642_21.png
CRUE
发表于 2025-3-25 08:14:10
http://reply.papertrans.cn/43/4267/426642/426642_22.png
mettlesome
发表于 2025-3-25 15:41:41
Introduction,ding blocks as possible. In the design of high-performance electronic circuits the use of analog filters is unavoidable. The advance of the Very-Large Scale Integration (VLSI) techniques demands for high-frequency and high-performance active filtering. In Telecommunication applications, for instance
intolerance
发表于 2025-3-25 17:45:01
Very Low-Distortion Operational Transconductance Amplifiers for High-Frequency Applications,constant and the dc gain of the lossy integrators . Several techniques for the implementation of full CMOS continuous-time integrators have been already reported . These design techniques can be divided in RC active filters, MOSFET-C filters and OTA-C filters.
Prostatism
发表于 2025-3-25 23:36:36
http://reply.papertrans.cn/43/4267/426642/426642_25.png
GRAIN
发表于 2025-3-26 03:04:52
High-Performance Realizations of Continuous-Time Filters, type of structures, ladder filters and biquadratic based filters . The frequency of these filters ranges from 100 kHz up to 10.7 MHz. For the design of these filters, the techniques described in chapters 2 to 4 are employed. The employed OTAs use the low-distortion input-stage presente
BUDGE
发表于 2025-3-26 05:00:41
General Conclusions,opologies and techniques, the design of large-signal (up to 3 Volts peak to peak with power supplies of ± 2.5 V) and low-distortion (total harmonic distortion lower than — 60 dB) continuous-time filters is feasible in 1.2–1.5 p.m CMOS technologies. Due to the very large linear range of the linearize
adhesive
发表于 2025-3-26 10:59:58
http://reply.papertrans.cn/43/4267/426642/426642_28.png
dilute
发表于 2025-3-26 16:01:02
http://reply.papertrans.cn/43/4267/426642/426642_29.png
Harridan
发表于 2025-3-26 17:35:18
http://reply.papertrans.cn/43/4267/426642/426642_30.png