看法等
发表于 2025-3-23 11:37:54
Circuit Placement, Chip Optimization, and Wire Routing for IBM IC Technology,interchange sinks of equivalent nets, move and create parallel copies of clock buffers, add load circuits to balance clock net loads, and generate balanced clock tree routes. Routing is done using a grid-based, technologyindependent router that has been used over the years to wire chips. There are n
意外的成功
发表于 2025-3-23 13:51:58
Optical Clock Distribution in Electronic Systems, particular, a single optical source, modulated to provide the clock signal, replaces the multitude of optical sources/modulators which would be needed for extensive optical data interconnections. Using this single optical clock source, the technical problem reduces largely to splitting of the optic
Complement
发表于 2025-3-23 20:41:46
http://reply.papertrans.cn/43/4263/426280/426280_13.png
grovel
发表于 2025-3-24 02:00:13
High Performance Clock Distribution Networks,lements and interconnect but by the ability to synchronize the flow of the data signals. Different synchronization strategies have been considered, ranging from completely asynchronous to fully synchronous. However, the dominant synchronization strategy within industry will continue to be fully sync
MUT
发表于 2025-3-24 02:35:38
Clock Skew Optimization for Peak Current Reduction,e caused by the simultaneous switching of highly loaded clock lines and by the signal propagation through the sequential logic elements. In this work we propose a methodology for reducing the amplitude of the current peaks. This result is obtained by clock skew optimization. We propose an algorithm
单纯
发表于 2025-3-24 09:41:25
http://reply.papertrans.cn/43/4263/426280/426280_16.png
BURSA
发表于 2025-3-24 14:23:54
Buffered Clock Tree Synthesis with Non-Zero Clock Skew Scheduling for Increased Tolerance to Processtems. The timing behavior of a synchronous digital circuit is obtained from the register transfer level description of the circuit, and used to determine a non-zero clock skew schedule which reduces the clock period as compared to zero skew-based approaches. Concurrently, the . of clock skew for ea
TAP
发表于 2025-3-24 15:26:22
http://reply.papertrans.cn/43/4263/426280/426280_18.png
赏钱
发表于 2025-3-24 22:09:01
,Clock Distribution Methodology for PowerPC™ Microprocessors,ntegrated circuits, dictate the need for clock networks with smaller skew tolerances, large sizes, and lower capacitances. In this paper we discuss some of the issues in clock network design that arise in this context. We describe the clock design methodology and techniques used in the design of clo
FUSE
发表于 2025-3-25 01:37:34
Circuit Placement, Chip Optimization, and Wire Routing for IBM IC Technology,requirements are increasing, the effects of wiring on delay are becoming more significant. Larger chips are also increasing the chip wiring demand, and the ability to efficiently process these large chips in reasonable time and space requires new capabilities from the physical design tools. Circuit