慷慨不好
发表于 2025-3-26 22:08:04
Ellen G. Laber PhD,C. Glenn Begley MBBS, PhD, FRACP, FRCPath, FRCPAhangeable element (resistor) of an active two-pole passes into a bunch of these lines. The bunch centre coordinates do not depend on this changeable element. It is proposed to use as the parameters of the generalized equivalent generator such a load current and voltage, which proved the current acro
易怒
发表于 2025-3-27 02:19:27
http://reply.papertrans.cn/43/4256/425563/425563_32.png
consent
发表于 2025-3-27 07:39:51
Graham Molineux PhDf passive four-ports is investigated by affine and projective transformations too. The direct and reverse formulas of recalculation of currents and non-uniform coordinates are obtained in the form of fractionally linear expressions of identical type. The results allow separating or restoring two sig
无畏
发表于 2025-3-27 12:09:26
http://reply.papertrans.cn/43/4256/425563/425563_34.png
dominant
发表于 2025-3-27 15:10:38
Keith E. Langley PhDle circuits. It allows revealing the invariant properties of circuits; that is, such expressions, which turn out identical to all regime parameters. These invariant expressions can be assumed as the basis of well-founded definition of regimes in the relative form.
欢笑
发表于 2025-3-27 18:15:46
http://reply.papertrans.cn/43/4256/425563/425563_36.png
BIPED
发表于 2025-3-27 22:13:29
ers of a circuit. The results of Chap. . are used for interpretation of changes or “kinematics” of the circuit regimes. Changes of regime parameters are introduced by a cross-ratio of four points. Easy-to-use formulas of the recalculation of the currents, which possess the group properties at change
condemn
发表于 2025-3-28 05:21:21
Richard M. Fox MB, PhD, FRACPle circuits. It allows revealing the invariant properties of circuits; that is, such expressions, which turn out identical to all regime parameters. These invariant expressions can be assumed as the basis of well-founded definition of regimes in the relative form.
使困惑
发表于 2025-3-28 08:23:27
David C. Dale MDtigated on uniform distribution of relative values of currents when the actual loading corresponds to the capacity of a concrete source. Novel concepts for quantitative representation of operating regimes of sources are entered with the use of projective geometry method.
Maximize
发表于 2025-3-28 13:07:15
http://reply.papertrans.cn/43/4256/425563/425563_40.png