Constrain
发表于 2025-3-28 16:18:03
http://reply.papertrans.cn/43/4238/423716/423716_41.png
提炼
发表于 2025-3-28 19:11:21
Mechthild Busch-Stockfisches some of the issues of adequate machine modeling and attempts to provide a firmer basis for selection of an appropriate model and to confirm or disprove the equivalence of different approaches. The results of the IM model run up are then compared to the results obtained from the measurements on th
铁塔等
发表于 2025-3-28 23:17:56
Gert-Wolfhard von Rymon Lipinski,Erich Lückser. The overall optimization is subdivided into a series of subproblems with cost functions and search spaces of increasing fineness, such that each subproblem can be solved with the output of its predecessor. A solution of the waiter motion problem with four objects illustrates the applicability o
人类学家
发表于 2025-3-29 04:59:09
http://reply.papertrans.cn/43/4238/423716/423716_44.png
内向者
发表于 2025-3-29 08:47:48
Thomas Kühn,Manfred Kutzke,Jens Arne Andresenand oil). Optimization of the cutting parameters is very important in determining the optimum cutting conditions, thus reduce machining cost and time consumed. From the results obtained, better surface roughness value was determined by a combination of cutting speed 150 m/min, and feed rate 0.1 mm/r
言外之意
发表于 2025-3-29 13:23:46
Johannes Krämerte finished, we nevertheless decided to include these papers. We thank the many authors for their enthusiastic and prompt response to - occasionally tedious - editorial suggestions and requests. We are sure that this collective effort has resulted in a book that will make an important contribution to the fiel978-94-010-6048-6978-94-011-4886-3
最初
发表于 2025-3-29 19:06:35
http://reply.papertrans.cn/43/4238/423716/423716_47.png
Exclude
发表于 2025-3-29 23:30:08
http://reply.papertrans.cn/43/4238/423716/423716_48.png
口味
发表于 2025-3-30 02:44:16
http://reply.papertrans.cn/43/4238/423716/423716_49.png
弄污
发表于 2025-3-30 07:11:52
http://reply.papertrans.cn/43/4238/423716/423716_50.png