有限
发表于 2025-3-23 10:06:37
,Die Bestimmung der Härte der Materialien,iger Weise feststellen kann. Alle möglichen Eigenschaften der Materialien sind herangezogen worden, um aus ihnen den Grad der Härte abzuleiten, und nur sehr wenige Vorschläge sind es, welche einigen Erfolg gezeitigt haben.).
束缚
发表于 2025-3-23 15:14:09
http://reply.papertrans.cn/43/4237/423662/423662_12.png
Factorable
发表于 2025-3-23 18:33:02
,Anderweite Baustoffprüfungen,908; Derselbe, Handbuch der bautechnischen Gesteinsprüfung, Berlin 1912, Gebr. Borntraeger; Derselbe, Leitsätze für praktische Beurteilung der natürlichen Bausteine, Berlin 1915, Borntraeger; Kerl, Handbuch der gesamten Tonwarenindustrie, Braunschweig; ferner Hinrichs en, Material-prüfungswesen, und
临时抱佛脚
发表于 2025-3-24 02:10:01
http://reply.papertrans.cn/43/4237/423662/423662_14.png
污点
发表于 2025-3-24 06:03:39
http://reply.papertrans.cn/43/4237/423662/423662_15.png
格子架
发表于 2025-3-24 08:01:43
Otto Wawrziniokthod is used to simulate the thermal analysis of Li-ion batteries under the MSMD model of a battery in ANSYS Fluent. The simulations have been carried out for estimating the maximum temperature of the battery under different velocities of fluid using air, water, and nanofluid coolants. The result sh
Ventricle
发表于 2025-3-24 13:20:21
http://reply.papertrans.cn/43/4237/423662/423662_17.png
AROMA
发表于 2025-3-24 17:38:51
Otto Wawrziniokd LIDAR. Thus the time is ideal for a state of the art publication, which provides a series of authoritative reviews of the Irish Quaternary incorporating these most recent advances.978-94-6239-219-9Series ISSN 2543-0327 Series E-ISSN 2543-0335
修改
发表于 2025-3-24 21:27:39
Otto Wawrziniokinal connection point by specifying the starting point of the connection and using the condition of the unstressed connection. The proposed method allows to design complex technical forms and create on their basis new models of a smooth trajectory from conical arcs.
LARK
发表于 2025-3-25 01:27:30
Otto Wawrziniokall the three main phases of a curve. The analysis of the data shows that these indices are quite reliable even if, in some particular cases, they show little discrepancies. This happens because the indices must be interpreted differently in dependence of the various types of curve, which are divers