CUR
发表于 2025-3-28 17:19:40
http://reply.papertrans.cn/43/4233/423204/423204_41.png
小步舞
发表于 2025-3-28 20:41:52
Georg Kneer,Markus SchroerDas Grundlagenwerk zur soziologischen Theorie.Die wichtigsten Theorieangebote in übersichtlich und ausführlich dargestellt.Internationaler Diskurs
LINES
发表于 2025-3-28 23:34:15
http://reply.papertrans.cn/43/4233/423204/423204_43.png
遍及
发表于 2025-3-29 05:08:22
978-3-531-19673-2VS Verlag für Sozialwissenschaften | Springer Fachmedien Wiesbaden GmbH, Wiesbaden 2009
Synapse
发表于 2025-3-29 07:28:18
http://reply.papertrans.cn/43/4233/423204/423204_45.png
JAMB
发表于 2025-3-29 11:50:47
http://reply.papertrans.cn/43/4233/423204/423204_46.png
CHYME
发表于 2025-3-29 18:28:53
Georg Kneers in this text will allow the reader to move beyond the conventional fluid motion of forced-air convection methods. More advanced cooling techniques include liquid immersion, multiphase cooling, and jet impingement.
碎石头
发表于 2025-3-29 23:23:17
Thomas Kron,Lars Winterties. However, as the particle size of the powder metals decreases, achieving higher-density numbers becomes increasingly challenging. For this reason, the HVC technique cannot be adopted for manufacturing W85-Cu heat sinks as the particle size of the tungsten powder is very fine (FSSS 3 μm or finer
Hallmark
发表于 2025-3-30 03:38:39
Rainer Winteraterials, like Al and Cu, have their advantages and disadvantages. Composite materials like CuW, CuMo, AlSiC, and Al-graphite are a tradeoff between the thermal conductivity (TC) and coefficient of thermal expansion (CTE). Using CuW as an example, a higher Cu content will increase the TC and lower t
antiquated
发表于 2025-3-30 05:55:12
Paula-Irene Villahe element is deposited on the surface by pack cementation or by vapor phase deposition or through other methods, the subsequent diffusion process shall depend on the diffusivity of the element, temperature, concentration gradient and the time of holding at the temperature. Hard surfaces formed by d