谆谆教诲
发表于 2025-3-25 06:33:06
http://reply.papertrans.cn/43/4223/422280/422280_21.png
不能和解
发表于 2025-3-25 08:25:13
http://reply.papertrans.cn/43/4223/422280/422280_22.png
receptors
发表于 2025-3-25 12:33:16
http://reply.papertrans.cn/43/4223/422280/422280_23.png
bacteria
发表于 2025-3-25 19:32:10
Daniil S. Tsiklisthe SystemC, SystemVerilog, and Verilog flavors, both the block comment style (/* ....*/) and the trailing comment style (// ....<eol>) are supported. For the VHDL flavor, the trailing comment style (-- ....<eol>) is supported. For the GDL flavor, both the block comment style (/* ....*/) and the tra
乱砍
发表于 2025-3-25 23:44:12
http://reply.papertrans.cn/43/4223/422280/422280_25.png
Neutropenia
发表于 2025-3-26 00:44:26
Design and Construction of High- and Ultrahigh-Pressure Apparatus,wall thicknesses sufficient for the apparatus to withstand the load to be applied without permanent deformation. For equipment working at very high pressures, plastic deformation is included in calculation of wall thicknesses. The occurrence of this type of deformation is utilized in construction, a
Jocose
发表于 2025-3-26 06:40:29
Methods of Measuring High Pressures, the pressure of a column of mercury 760 mm high on an area of 1 cm. with mercury density 13.5951 g/cm. (at 0°C) and an acceleration of gravity equal to 980.665 cm/sec.. The weight of such a mercury column is 1.033 kg. Thus, a normal atmosphere (n. atm.) corresponds to 1.033 kg/cm..
extemporaneous
发表于 2025-3-26 08:31:25
Parts for High-Pressure Installations,he quality of manufacture of parts of the installation. Especially strict requirements are placed on threads and sealing surfaces. Threads should be rounded, i.e., without a sharp crest. In order to reduce the danger of so-called “seizing,” threads should not be dimensioned the same as the sealing s
Accrue
发表于 2025-3-26 14:33:39
http://reply.papertrans.cn/43/4223/422280/422280_29.png
bronchodilator
发表于 2025-3-26 19:49:49
General Laboratory High-Pressure Equipment,mary difference is the combination of cumbersome metal machinery and apparatus, glass analytic apparatus, and precise measuring instruments. This combination makes it especially necessary to think through the problem of efficiently locating instruments and apparatus available for use.