GILD
发表于 2025-3-23 11:29:10
An expert system approach to surface mount pick-and-place machine selection,t of time spent and the possibility of a sub-optimal decision could both adversely affect the manufacturing economics of production operations. The machine selection problem in the PCB assembly domain requires the use of multi-alternative and multi-attribute decision-making principles (Shieh, 1991).
预防注射
发表于 2025-3-23 17:29:51
http://reply.papertrans.cn/43/4214/421308/421308_12.png
Introduction
发表于 2025-3-23 18:26:55
http://reply.papertrans.cn/43/4214/421308/421308_13.png
Physiatrist
发表于 2025-3-24 01:38:36
Karl-Ernst Wohlfarth-Bottermannntory. The performance of a manufacturing system is affected by numerous needs, such as material requirement planning (MRP), capacity planning, facility and material handling device planning, inventory control, tool management, scheduling, quality control, and manufacturing information system manage
custody
发表于 2025-3-24 03:17:06
http://reply.papertrans.cn/43/4214/421308/421308_15.png
控诉
发表于 2025-3-24 07:45:54
https://doi.org/10.1007/978-3-322-86456-7dge-based systems for process planning, scheduling, facilities layout and intelligent design environments (Kumara ., 1986; Kusiak and Chen, 1988; Steffan, 1986). The evolution of intelligent systems can be thought of as having passed through several phases. While logic and knowledge representation w
思考
发表于 2025-3-24 13:19:47
http://reply.papertrans.cn/43/4214/421308/421308_17.png
TEM
发表于 2025-3-24 18:45:52
https://doi.org/10.1007/978-3-030-71506-9 technology has evolved as a new generation of design techniques. It also paved the way for implementing computer-integrated manufacturing (CIM). However, the key issue to accomplish the objective is conceptual design automation (Wang .., 1990).
conference
发表于 2025-3-24 22:54:33
https://doi.org/10.1007/978-1-4302-1975-0 offer the potential to prevent failure and often to reduce cost. T/C selection is an important part of the design for manufacture (DFM) spectrum and has been a very elusive activity to formalize. With the advent of knowledge-based systems, provision of T/C selection assistance to the designer early
Foreshadow
发表于 2025-3-25 00:07:53
Zensur in der Weimarer Republik heavily experience-oriented and casting design is an iterative task between casting designers and foundry experts. There is a lot of wastage of resources and time during the design-manufacturing cycle when a part is being engineered. Initial estimates of manufacturability are valuable to the design