diathermy
发表于 2025-4-1 03:30:03
Hans Dieter Baehr,Reiner Tillner-Rothntial, involves the movement of ions across the nerve membrane, and externally applied electrical currents create electric fields that can modulate that ion movement to induce action potentials. These currents are generally applied by a pulsed current source circuit, but these circuits waste a large
重力
发表于 2025-4-1 07:46:06
http://reply.papertrans.cn/43/4209/420884/420884_62.png
saturated-fat
发表于 2025-4-1 10:56:30
http://reply.papertrans.cn/43/4209/420884/420884_63.png
Meditative
发表于 2025-4-1 16:16:47
,Ausströmen von Gas durch Düsen,ereby facilitating the gait in humans with compromised ankle joint control. The activation is achieved by bursts of low-intensity electrical charge pulses of peripheral nerves via surface electrodes or implantable electrodes. The bursts of stimulation pulses need to be timed to generate dorsiflexion
MANIA
发表于 2025-4-1 18:53:50
https://doi.org/10.1007/978-3-7091-8447-9properties for quality control, food product analysis, and nondestructive testing. Conventional state-of-the-art NMR spectroscopy systems utilize bulky superconducting magnets, have a room-filling size, and cost millions of euros. Over the past decade, advances in permanent magnet technology have le
情感
发表于 2025-4-2 02:13:56
https://doi.org/10.1007/978-1-4613-4268-7rge numbers of recording channels. Signal fidelity depends on the performance of the initial amplification stage. With many recording channels, the power efficiency of the amplifier also becomes critical. In this chapter, we discuss some of the requirements for biopotential amplifiers and the design
任命
发表于 2025-4-2 03:54:50
Sensors for Vital Signs: ECG Monitoring Systems, such as arrhythmia or heart attack and is typically performed using a holter monitor connected to the electrode leads placed around the chest and limbs. There is a need for continuous real-time wearable ECG monitoring systems for managing chronic heart conditions. The chapter will offer a general u
改进
发表于 2025-4-2 08:14:50
Sensors for Vital Signs: Oxygen Sensors,that are used for this purpose, such as the Clark electrode, fluorescence quenching, PEBBLEs, optodes, near-infrared spectroscopy, and pulse oximetry. The challenges of designing monolithic low-power pulse oximeter biochips are discussed in detail. Design techniques focused on lowering the oximeter’
VEST
发表于 2025-4-2 13:53:51
Sensors for Vital Signs: Humidity Sensors,monitoring as well as general healthcare application. The humidity sensors can be used on the detection of breathing cycles (due to the high humidity associated to human breath) as well as indicators for the microclimate conditions that can be related to pressure ulcers. In wearable technology, humi