感染
发表于 2025-3-23 10:23:42
Weldability of HSLA Steels in Relation to Appropriate Toughness Requirements for Use in Safe and Ecoe such obstacles worldwide research has been performed on modern structural integrity concepts and weldability of HSLA steels for long time. Taking account of such research, which has led to practical welding aspects for such steels (such as t8/5 concept), it has become possible to produce safe weld
山羊
发表于 2025-3-23 13:51:13
Effect of Nitrogen on Transformation Behaviors and Microstructure of V-N Microalloyed Steeleads to increasing quantities of ferrite and the transformed ferrite is smaller in size. The hardness test results reveal that the hardness number increases with increasing nitrogen addition at low cooling rate while the value tends to be smaller due to increasing nitrogen addition at high cooling r
obscurity
发表于 2025-3-23 18:22:46
Quantifying the Effect of Nb and Mo on Transformation Products Using Advanced EBSD Analysisuished and categorized based on their orientation relationship with the parent austenite grain. In particular, microstructure refinement has been quantified in terms of high angle grain boundary length per unit area. In addition the fraction and size of carbon-rich martensite/austenite constituents
样式
发表于 2025-3-24 00:01:24
Decomposition of Supercooled Austenite in Continuous Cooling Transformation Process of a Mn-Mo-Ni LoWhen cooling rates greater than approximately 50 °C/s, the microstructure are martensite and retained austenite at room temperature. With the increase of cooling speed, the residual austenite content increased before decreased at the cooling speed of 2 °C/s, which is probably associated with the inc
露天历史剧
发表于 2025-3-24 05:30:47
Thermodynamic Calculations and Precipitation Simulations of HSLA Steelsl steels, especially for strengthening HSLA steels. The precipitation kinetics of alloy carbides, i.e., NbC, is simulated using TC-PRISMA, a computational tool that is integrated with Thermo-Calc and DICTRA together with additional interface property data. Properties such as interfacial energies bet
边缘
发表于 2025-3-24 10:06:58
https://doi.org/10.1007/b138578 and designed with high strength niobium microalloyed steel, which resulted in a weight reduction of 25%. CBMM’s facility in Araxá, Brazil was selected in the second half of 2013 as the demonstration site to test the efficiency of the Super Scooter and Solar Charging Station. Each Super Scooter has
尖叫
发表于 2025-3-24 12:07:39
http://reply.papertrans.cn/43/4204/420331/420331_17.png
WITH
发表于 2025-3-24 15:29:32
http://reply.papertrans.cn/43/4204/420331/420331_18.png
无效
发表于 2025-3-24 21:46:49
https://doi.org/10.1007/978-94-017-3364-9eads to increasing quantities of ferrite and the transformed ferrite is smaller in size. The hardness test results reveal that the hardness number increases with increasing nitrogen addition at low cooling rate while the value tends to be smaller due to increasing nitrogen addition at high cooling r
ARIA
发表于 2025-3-25 02:12:58
http://reply.papertrans.cn/43/4204/420331/420331_20.png