净礼
发表于 2025-3-25 11:48:32
Length of the Tie Rod,Calculating the free and total lengths of the tie rods is an essential step in validating their compliance with the design. But also, to resize these elements to the current site configuration. An example of interpretation is given.
惰性气体
发表于 2025-3-25 17:50:39
,Dynamic Stiffness—Force,The relation between dynamic stiffness is presented with two examples of diagnosis. A copy of the patent in the appendix gives a detailed presentation.
加入
发表于 2025-3-25 20:54:45
http://reply.papertrans.cn/40/3912/391144/391144_25.png
Ventricle
发表于 2025-3-26 04:12:02
http://reply.papertrans.cn/40/3912/391144/391144_26.png
在驾驶
发表于 2025-3-26 06:31:25
Earth Pressure,On the most important wall of our diagnosis, a synthesis of the tension results is compared to a theorical approach. A particular focus is done on the elements located at the foot of the wall and interfering with the tension results.
Atrium
发表于 2025-3-26 10:44:08
http://reply.papertrans.cn/40/3912/391144/391144_28.png
叙述
发表于 2025-3-26 15:40:18
http://reply.papertrans.cn/40/3912/391144/391144_29.png
语言学
发表于 2025-3-26 20:03:25
Corrosion,The Swiss standard SAI 267/1 (2013) leads to validate the quality of tie rod insulation. This test is carried out to determine whether the tie rod can be re-tensioned.
Valves
发表于 2025-3-26 21:17:50
http://reply.papertrans.cn/40/3912/391144/391144_31.png
pus840
发表于 2025-3-27 04:38:41
The Fatigue Phenomenon,During testing, we noted the influence of cyclic loads on tie-rod load losses. In a number of tests, we measured the deformations induced in the tie rods by the loads of railway trains. During direct tensile tests, we observed strand failures in tie rods subjected to these loads.