LVAD360
发表于 2025-3-30 11:27:24
http://reply.papertrans.cn/39/3842/384122/384122_51.png
DENT
发表于 2025-3-30 13:33:09
Influence of Nano-materials on Compaction and Strength Behavior of Clayey Soils, with increasing nano-material additives. However, the optimum value of nano-material additives content was observed around 1.5%. Therefore, the main goal of this study was to stabilize soft soil deposits for its bulk utilization in various geotechnical applications for sustainable environment.
HOWL
发表于 2025-3-30 16:47:27
Conference proceedings 2020terization of geomaterials, modelling approaches, and geotechnical engineering education. With a combination of field studies, laboratory experiments and modelling approaches, the chapters in this volume address some of the most widely investigated geotechnical engineering topics. This volume will b
英寸
发表于 2025-3-30 21:51:19
Conference proceedings 2020and modelling approaches, the chapters in this volume address some of the most widely investigated geotechnical engineering topics. This volume will be of interest to researchers and practitioners alike..
要素
发表于 2025-3-31 02:54:47
http://reply.papertrans.cn/39/3842/384122/384122_55.png
MAG
发表于 2025-3-31 05:09:21
Entwicklung des Einzelhandels in Deutschlandcollected fractions were processed and characterized for their electrokinetic, mineralogical and surface properties. Based on the experimental results, the role of different particle size on the micro- and macro-level behaviour of selected soils was quantified.
飓风
发表于 2025-3-31 10:22:31
https://doi.org/10.1007/978-3-322-88588-3was also used to compare the performance of areca fiber. As compared to fly ash, the use of bottom ash is minimal all over the world. This study determines the strength of the soil stabilized with bottom ash and fibers at different proportions. The percentage of bottom ash was varied from 0 to 40%; fiber proportion was varied from 0 to 2%.
旅行路线
发表于 2025-3-31 15:28:37
http://reply.papertrans.cn/39/3842/384122/384122_58.png
哀悼
发表于 2025-3-31 21:36:23
Hans-Ernst Schwiete,Arnulf Schüfflerf embedment depth-to-bell diameter ratio (./.) of anchor 1–3. However, for ./. = 0.5, the optimum value of ./. is 4.0. The frictional efficiency as well as angle of internal friction does not have much influence on optimum value of ./. ratio.
金桌活画面
发表于 2025-4-1 00:40:23
,Abkürzungen und Formelzeichen,h density and compressive strength are studied. Apart from the short-term performance, long-term performance of CLSM samples is studied by conducting durability test. The results indicate that the replacement of fly ash by quarry dust or blast furnace slag showed satisfying performance and developed CLSM are suitable for various applications.