Self-Help-Group
发表于 2025-3-23 10:57:57
Modeling of Recuperators, Combustion Chambers, Afterburners,ocess of heat exchange occurs between the high and low temperature sides. The working principle of these components is the same (, , ). However, different working media are involved in the heat transfer process.
重画只能放弃
发表于 2025-3-23 16:45:00
Modeling the Compressor Component, Design and Off-Design,nergy, this total pressure increase requires external energy input, which must be added to the system in the form of mechanical energy. The compressor rotor blades exert forces on the working medium thereby increasing its total pressure. Based on efficiency and performance requirements, three types
巩固
发表于 2025-3-23 20:12:09
Turbine Aerodynamic Design and Off-design Performance,echanical energy (shaft work) with the surroundings takes place. In contrast to compressors, the total energy of the working medium is partially converted into shaft work, thus supplying necessary power to drive the compressor component, compensate for the bearing losses and provide the net power fo
冲突
发表于 2025-3-23 22:45:54
http://reply.papertrans.cn/39/3808/380762/380762_14.png
Substance
发表于 2025-3-24 06:24:27
Radial Equilibrium,w as a simple radial equilibrium condition with .. .. In practice, from an aerodynamics design point of view, a constant meridional velocity component or constant total pressure may not be desirable. As an example, consider the flow field close to the hub or tip of a stage where secondary flow vortices predominate.
粗鄙的人
发表于 2025-3-24 09:01:44
Nonlinear Dynamic Simulation of Turbomachinery Components and Systems,c flights, rocket propulsion systems and compression systems for transport of natural gas with a network of pipeline systems are a few examples of systems that heavily involve turbomachinery components.
多余
发表于 2025-3-24 13:14:09
http://reply.papertrans.cn/39/3808/380762/380762_17.png
Panacea
发表于 2025-3-24 15:27:27
Simulation of Gas Turbine Engines, Design Off-Design and Dynamic Performance,onents operate near their aerodynamic, thermal, and mechanical stress limits. Under these circumstances, any adverse dynamic operation causes excessive aerodynamic, thermal, and subsequent mechanical stresses that may affect the engine safety and reliability, and, thus, the operability of the engine if adequate precautionary actions are not taken.
lambaste
发表于 2025-3-24 19:48:16
http://reply.papertrans.cn/39/3808/380762/380762_19.png
Insul岛
发表于 2025-3-25 00:06:40
amic performance of gas turbines.Written by an experienced gThis book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently ava