Wallow
发表于 2025-3-26 23:01:07
http://reply.papertrans.cn/33/3214/321375/321375_31.png
majestic
发表于 2025-3-27 01:59:19
http://reply.papertrans.cn/33/3214/321375/321375_32.png
肉身
发表于 2025-3-27 07:14:22
http://reply.papertrans.cn/33/3214/321375/321375_33.png
恩惠
发表于 2025-3-27 11:03:40
http://reply.papertrans.cn/33/3214/321375/321375_34.png
upstart
发表于 2025-3-27 14:53:13
Reduction of Radiating Sound from CFRP Laminated Plates with Orthotropy,vestigations are needed. In order to grasp the vibration and acoustic feature of flat and curved CFRP laminated plates with orthotropy, the difference from isotropic material such as steel is clarified using experimental modal analysis. As a result CFRP is found to possess a dominant radiating sound
改变
发表于 2025-3-27 19:45:43
Rotating Disc Model for Complex Eigenvalue Analysis of Brake Squeal, fixed and there are sliding contact between the pads and the disc. In the most common used complex eigenvalue analysis method, the moving load nature was normally ignored. In this paper a modal based rotating disc model is purposed. Modal parameters of stationary disc were calculated from finite el
Harbor
发表于 2025-3-28 01:54:40
http://reply.papertrans.cn/33/3214/321375/321375_37.png
Deference
发表于 2025-3-28 03:49:48
http://reply.papertrans.cn/33/3214/321375/321375_38.png
Repatriate
发表于 2025-3-28 07:45:45
An Estimation of Torsional Compliance (Stiffness) from Free-Free FRF Measurements: eRCF Applicationasured frequency response functions (FRFs) from a structural system with free-free boundary conditions. The eRCF is estimated using FRF measurements from impact testing, namely a four by four (4 × 4) FRF matrix at four separate, symmetric locations on a structure. A companion paper presents the comp
Graves’-disease
发表于 2025-3-28 10:47:44
Estimation of Bending Compliance (Stiffness) from Free-Free FRF Measurements: eBCF Theory,d frequency response functions (FRFs) from a structural system with free-free boundary conditions. The eBCF is estimated using FRF measurements involving impact testing that involve obtaining a six by six (.) FRF matrix at six separate, symmetric locations on a structure. This is in contrast to trad