大小
发表于 2025-3-21 20:02:11
http://impactfactor.cn/if/?ISSN=BK0321360http://impactfactor.cn/ifr/?ISSN=BK0321360http://impactfactor.cn/at/?ISSN=BK0321360http://impactfactor.cn/atr/?ISSN=BK0321360http://impactfactor.cn/tc/?ISSN=BK0321360http://impactfactor.cn/tcr/?ISSN=BK0321360http://impactfactor.cn/ii/?ISSN=BK0321360http://impactfactor.cn/iir/?ISSN=BK0321360http://impactfactor.cn/5y/?ISSN=BK0321360http://impactfactor.cn/5yr/?ISSN=BK0321360
BUOY
发表于 2025-3-21 23:23:42
https://doi.org/10.1007/978-3-658-12564-6The identification of the different models is made from monotonous and cyclic characterisation tests according to temperature..The comparison of the test results with those stemming from calculation allows a better comprehension of the thermoelastoplastic behaviour of the structure.
地牢
发表于 2025-3-22 03:12:54
https://doi.org/10.1007/978-3-322-89477-9d. To deal in detail with the problem of state of stress at forming The Iron and Steel Research Institute has available the visioplastic method, the photoplastic method for the surface foils with application of reflected light and the photoplastic method with light passing through the models prepared of amorphous mass.
无思维能力
发表于 2025-3-22 06:24:42
http://reply.papertrans.cn/33/3214/321360/321360_4.png
松果
发表于 2025-3-22 09:42:56
https://doi.org/10.1007/978-1-4842-2385-7ortance of various design parameters. This model has proven to be an important tool for optimizing the design. Test measurements show the experimentally determined transducer characteristics to be in good agreement with model predictions and the transducer to come up to expectations.
choroid
发表于 2025-3-22 15:36:30
Automated Testing of Concrete Compressive Properties,quite efficient and do not allow automation of the testing process. The use of resistance wire strain gagues glued on the specimen surface has also many disadvantages, such as short measuring base, limited range, etc. Therefore a question is often raised about the reproducibility of such tests.
choroid
发表于 2025-3-22 17:24:32
Metallic Structures Under Mechanical and Cyclical Thermal Loading,The identification of the different models is made from monotonous and cyclic characterisation tests according to temperature..The comparison of the test results with those stemming from calculation allows a better comprehension of the thermoelastoplastic behaviour of the structure.
Kernel
发表于 2025-3-22 23:47:00
http://reply.papertrans.cn/33/3214/321360/321360_8.png
nurture
发表于 2025-3-23 04:07:15
,Micro-Computer Based Measurement and Processing Method for Human Locomotor System’s Take-Off Propernd kinetic) variables of movement only has nevertheless led to many important findings regarding the interplay between active (muscle generated), passive and inertial forces and moments of forces the body is constrantly being subjected to in the course of various movement patterns.
Rct393
发表于 2025-3-23 07:04:34
http://reply.papertrans.cn/33/3214/321360/321360_10.png