使饥饿
发表于 2025-3-23 15:20:14
Facile Fabrication of a Low-Cost Electrochemical Temperature Sensor, shown high consistency and sensitive response towards a specific range of temperature values. Further enhancement was made by adding a small amount (1%) of titanium dioxide (TiO.) nanoparticle (25 nm) into the CuTsPc solution and has increased the sensitivity in capacitance values toward the change
homocysteine
发表于 2025-3-23 19:08:40
Utilizing Perimeter Design in Sandwich Plates for Ship Structures,he selected ship is the Roro ship, and this location selection is based on Lloyd’s Provisional Rules recommendations. The results of the analyzes were compared with the strength assessment, and the weight loss estimates were presented.
钩针织物
发表于 2025-3-24 02:03:57
http://reply.papertrans.cn/33/3207/320626/320626_14.png
NIB
发表于 2025-3-24 04:55:08
http://reply.papertrans.cn/33/3207/320626/320626_15.png
CRAFT
发表于 2025-3-24 09:25:49
http://reply.papertrans.cn/33/3207/320626/320626_16.png
Camouflage
发表于 2025-3-24 12:43:55
http://reply.papertrans.cn/33/3207/320626/320626_17.png
脱水
发表于 2025-3-24 18:49:11
http://reply.papertrans.cn/33/3207/320626/320626_18.png
现代
发表于 2025-3-24 20:29:00
Continuous Carbonization and Activation Process of Activated Carbon from Agriculture Waste,ion performance was deemed dependable. This study demonstrated the potential for continuous AC production systems to improve the efficiency and quality of activated carbon production. Furthermore, the use of agriculture waste materials as raw materials for this system can contribute to sustainable d
Extort
发表于 2025-3-25 02:40:35
Enhancing the Performance of Fluoro-Optic Temperature Sensors: Design Optimization and Calibration gies for fluoro-optic temperature sensors, including fluorophore selection, optical setup optimisation, and thermal management and signal processing considerations, are investigated. These alterations seek to improve the sensor‘s sensitivity, response time, and overall performance. The proposed cali
纪念
发表于 2025-3-25 03:41:09
Defect Remedy Procedures Using Cold Method on Superheater Header (SA335 P11),agation. The cold method remedy started with pre-cleaning, initial visual inspection (VI), penetrant testing (PT), in-situ metallography microstructure evaluation, mechanical sub-surface removal using burr grinding, build-up of the sub-surface using TIG welding, and finally, defect-free verification