kidney 发表于 2025-3-23 13:32:12

http://reply.papertrans.cn/32/3192/319109/319109_11.png

敌手 发表于 2025-3-23 16:09:59

http://reply.papertrans.cn/32/3192/319109/319109_12.png

不规则的跳动 发表于 2025-3-23 18:18:16

Rozita M. Moattari,Toraj Mohammadiications that involve the manufacturing of complex shapes and geometries, along with high dimensional accuracy. Conceptually EDM is a simple process, which is based on the erosion that accompanies the spark occurrence between two electrically conductive materials, one that acts as working electrode

FIR 发表于 2025-3-23 23:38:23

Piotr Konieczka,Małgorzata Rutkowskaone parts manufactured from DC05 deep drawing steel. To perform the FEM simulations for the considered parts in different dimensional configurations could be used the following software components: ANSYS APDL for the pre-processing stage, LS-DYNA Explicit to solve the analysis, LS-PrePost for result

CHOP 发表于 2025-3-24 04:41:53

http://reply.papertrans.cn/32/3192/319109/319109_15.png

incision 发表于 2025-3-24 07:53:54

Green Behaviors in the Workplace C26000 nanosecond pulsed Q-switched Nd:YAG 1064nm laser engraving process. Laser engraving experiments were performed using a LASERTEC 40 laser machining center made by DMG MORI for various sets of process parameters (average power, repetition rate, scanning speed) and engraving geometry characteri

词汇记忆方法 发表于 2025-3-24 12:17:31

Reza Arjmandi,Azman Hassan,Zainoha Zakariacular Dynamics simulations has been presented to facilitate the understanding of the fundamental principles of this numerical modelling method and the techniques employed to extract meaningful macroscopic properties out of atomistic simulations. The advances of Molecular Dynamics simulations with re

APRON 发表于 2025-3-24 16:18:51

https://doi.org/10.1007/978-94-007-6052-3ocess has been used for carrying out boring operation of Ni based superalloy (Inconel 718). Boring operation has been performed by guiding and controlling the movement of tool electrode on radial orbital tool path. Experiments have been conducted using Taguchi’s method to obtain the influence of orb

Monocle 发表于 2025-3-24 22:35:32

http://reply.papertrans.cn/32/3192/319109/319109_19.png

Omnipotent 发表于 2025-3-25 02:07:06

http://reply.papertrans.cn/32/3192/319109/319109_20.png
页: 1 [2] 3 4 5
查看完整版本: Titlebook: Experiments and Simulations in Advanced Manufacturing; Panagiotis Kyratsis,J. Paulo Davim Book 2021 The Editor(s) (if applicable) and The