惩罚
发表于 2025-3-28 18:29:43
http://reply.papertrans.cn/32/3190/318957/318957_41.png
Femine
发表于 2025-3-28 20:53:56
Die Wasserhaltungsanlagen mit Dampfbetrieb parameters such as power generated, power density, frequency broadening, frequency shifting, and optimal load impedance will be quantified. Results show that wider compliance arms decrease buckling amplitude, but increase the bi-stability switching regime and the overall power production. Current d
Coterminous
发表于 2025-3-29 02:17:35
http://reply.papertrans.cn/32/3190/318957/318957_43.png
搜寻
发表于 2025-3-29 03:03:42
http://reply.papertrans.cn/32/3190/318957/318957_44.png
habitat
发表于 2025-3-29 09:49:30
Gewissensmanagement in Organisationenact location and mechanical properties of impactors, nonlinear transient phenomenon is empirically studied to decouple the understanding using the dominant frequency band (DFB) and lag coefficients of the acousto-ultrasonic signals through TSSC. Next the understanding was correlated with the elastic
责难
发表于 2025-3-29 13:16:24
http://reply.papertrans.cn/32/3190/318957/318957_46.png
ODIUM
发表于 2025-3-29 19:32:53
Annkatrin Heuschkel,Claudia Rahnfelde and reliable results than X-ray diffraction for this particular part and material. A good agreement between residual stress measurement and FEA prediction has demonstrated that the integrated residual stress model is robust in predicting residual stresses and optimizing heat treatment of aluminum
厌烦
发表于 2025-3-29 21:53:48
Miroslav Matousek,Jörg Schneider, individual grains can be resolved in spots on the ring. The method requires collecting a sequence of 2D frames at increasing sample to detector distances. The entire three-dimensional X-ray diffraction pattern (XRD.) could be used to determine the average 2. ring position. This allows new types of
观点
发表于 2025-3-30 01:23:48
http://reply.papertrans.cn/32/3190/318957/318957_49.png
拱墙
发表于 2025-3-30 05:02:17
Electrical Impedance Spectroscopy for Structural Health Monitoring,nce, which ignores phase angle and reactance information. In order to test our hypothesis we implemented three different experiments to evaluate the effectiveness of the EIS technique: (1) specimen load sensitivity; (2) specimen damage sensitivity; and (3) specimen fatigue sensitivity. Multiple elec