Discrete
发表于 2025-3-25 03:48:24
http://reply.papertrans.cn/32/3183/318204/318204_21.png
affinity
发表于 2025-3-25 07:59:37
Neural Network-POMDP-Based Traffic Sign Classification Under Weather Conditionsce Contract), and found the following methods available: resistive isolation, junction isolation, dielectric isolation, isolation by silicon oxide and other dielectrics such as silicon nitride. Each approach has its merits and disadvantages in cost economics and trade-offs. The advantage of the diel
hallow
发表于 2025-3-25 14:56:31
Longitudinal Waves in Elastic Rods with Discontinuous Cross Sectionsmentally. In a rod with finite length, waves move back and forth along the rod; therefore, it may happen that two incident waves cross a discontinuity interface simultaneously. Thus, the reflected and transmitted waves induced at the interface will influence the incident waves due to the wave reflec
Incumbent
发表于 2025-3-25 17:37:34
Vorgangsbearbeitung im Amt der Salzburger Landesregierung,technik. Die diesbezüglichen Bemühungen des Amtes der Salzburger Landesregierung, insbesondere beim Einsatz der Informatik, werden aufgezeigt. Dabei steht die Optimierung von Geschäftsprozessen zunehmend im Vordergrund..Zur Unterstützung der Vorgangsbearbeitung ist in der Salzburger Landesverwaltung
ENACT
发表于 2025-3-25 20:12:19
http://reply.papertrans.cn/32/3183/318204/318204_25.png
Ardent
发表于 2025-3-26 00:35:28
http://reply.papertrans.cn/32/3183/318204/318204_26.png
Orchiectomy
发表于 2025-3-26 04:24:14
0302-9743 ormation Security, ASIACRYPT ‘96, held in Kyongju, Korea, in November 1996..The 31 revised full papers presented together with three invited contributions were carefully selected from a total of 124 submissions. The papers are organized in topical sections on discrete log based systems, efficient al
要控制
发表于 2025-3-26 12:06:19
http://reply.papertrans.cn/32/3183/318204/318204_28.png
Ataxia
发表于 2025-3-26 15:38:57
Improved Topology Optimization Model for Heat Sink Design Under Natural Convection,gy optimization model and manufactured by the laser-based powder bed fusion (L-PBF) 3D printing. The heat dissipation performance of the novel-designed heat sink is experimentally and numerically examined and it achieves a 23.5% lower thermal resistance compared to the conventional plate-fin heat sink.
Disk199
发表于 2025-3-26 17:43:53
http://reply.papertrans.cn/32/3183/318204/318204_30.png