Alveolar-Bone
发表于 2025-3-28 17:20:53
Refining Operating Variables,ied out in a refining pilot plant. In this way, it is possible to identify the most important operational variables, in terms of their direct effects on the desired quality of the refined pulp. The beating process in laboratory is also described considering the most usual laboratory beaters.
Malleable
发表于 2025-3-28 19:23:36
http://reply.papertrans.cn/32/3165/316418/316418_42.png
Abominate
发表于 2025-3-29 00:08:57
http://reply.papertrans.cn/32/3165/316418/316418_43.png
放大
发表于 2025-3-29 04:47:00
Book 2024aracteristics and the influence of these aspects on the quality of the pulp produced. In addition, the author describes the effects of the pulping process, mainly a chemical process, on pulp quality and how these wood characteristics influence both the refining process as the quality of the final pa
Mendicant
发表于 2025-3-29 07:17:22
Refining Strategies,s from refining mixtures of eucalyptus pulps with softwood pulps, also obtained in a pilot plant and simulating both separate refining and joint refining for different levels of pulp mixtures. Pulp fractionation strategies as well as alkaline chemical treatments (fiber swelling) are also discussed in this chapter.
政府
发表于 2025-3-29 13:41:47
,How to Avoid SS 7 Network Outages,l changes caused to the fibers as well as according to the direct effects of these changes on the properties of the paper produced. Effects on paper machine runability are also presented and discussed.
恃强凌弱
发表于 2025-3-29 15:35:48
http://reply.papertrans.cn/32/3165/316418/316418_47.png
Shuttle
发表于 2025-3-29 22:01:00
Refining the Chemical Pulps,l changes caused to the fibers as well as according to the direct effects of these changes on the properties of the paper produced. Effects on paper machine runability are also presented and discussed.
CRACY
发表于 2025-3-30 01:53:34
Refining Process Optimization,y is identified and described. It is related to the retention time of the pulp in the refiner and is attributed to the flocculation characteristics of the fibers. A new way of designing the discs (configuration) is presented to allow increasing the cutting length of the discs, generating lower refining intensities.