无能性
发表于 2025-3-25 04:38:55
Development of a Knee Joint Assistive-Mechanism Adapted for Bilateral Roll-Back Motionaximum displacement of 15 mm and an angle of 55° is used for the prototype mechanisms’ imaginary rotation centers, and their cam shapes are generated using asymmetrical modified trapezoid motion curves. The results show that the proposed mechanism can be rotated smoothly to generate the exact knee r
地名词典
发表于 2025-3-25 10:23:55
http://reply.papertrans.cn/32/3165/316415/316415_22.png
细胞膜
发表于 2025-3-25 14:25:20
Economic Material Use in Injection Moulding,aximum displacement of 15 mm and an angle of 55° is used for the prototype mechanisms’ imaginary rotation centers, and their cam shapes are generated using asymmetrical modified trapezoid motion curves. The results show that the proposed mechanism can be rotated smoothly to generate the exact knee r
拱形面包
发表于 2025-3-25 19:42:48
http://reply.papertrans.cn/32/3165/316415/316415_24.png
脖子
发表于 2025-3-25 21:47:53
http://reply.papertrans.cn/32/3165/316415/316415_25.png
Landlocked
发表于 2025-3-26 02:45:18
Design of a Finger Exoskeleton for Motion Guidanceanism that is able to follow human finger motion. Motion tracking is used to characterize the movement of the human finger. Thereby the design requirements are outlined. The mechanism is synthesized, and its simulated motion is compared with experimental data to validate the proposed design.
TAIN
发表于 2025-3-26 08:19:10
http://reply.papertrans.cn/32/3165/316415/316415_27.png
脆弱带来
发表于 2025-3-26 10:22:43
A Kinematic Characterization of a Parallel Robotic System for Lower Limb Rehabilitationn this paper addresses the challenges presented in numerous reports, like in the Multi-Annual Roadmap, ICT 24-28 concerning the need for rehabilitation and assistive devices with the ageing of population, especially in Europe. The robot has a simple design and it is intended to be used especially fo
充气女
发表于 2025-3-26 15:17:18
Passive Walking Biped Model with Dissipative Contact and Friction Forcest forces. In contrast to McGeer’s passive dynamic models, normal forces and frictional forces acting on the feet and ground have been taken into account in the proposed model. The equations of motion and of the passive dynamic biped are obtained by using the Standard Lagrange multiplier method. The
dissolution
发表于 2025-3-26 17:34:04
Mechatronic Model Based Jerk Optimization in Servodrives with Compliant Load model integrates the dynamics of the motor, transmission chain and compliant load as well as the dynamics of the control and is used to calculate the maximum overshoot in the load when it reaches the commanded final position as a function of the feed speed and the programmed jerk in the velocity pr